MikroTik

I have a new RB750UP. I want to set it so all 5 port will work as a switch. Can some one post me a sample config. I am using port 1 to 5 as POE to power ubiquiti equipment.

I unslaved port 3,4,5 and I created a bridge and added all 5 ports to the bride. Let me know if this is the best way to do this.


lags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU L2MTU MAX-L2MTU
0 R ether1-gateway ether 1500 1600
1 ether2-master-local ether 1500 1598 2030
2 ether3-slave-local ether 1500 1598 2030
3 ether4-slave-local ether 1500 1598 2030
4 ether5-slave-local ether 1500 1598 2030
5 R bridge1 bridge 1500 1600

You did all well. But if I am not mistaken the port 1 has no the PoE feature.

You could leave ports 2-5 on the switch, and then just bridge 1 and 2

Nick.