MikroTik

any one can help me i'am newbie in MT.
i using v 2.9 lv 5, i try using my vadem vg-496 and pcmcia card NL-2511.
my problem is :

[admin@MikroTik] > driver print detail
Flags: I - invalid, D - dynamic
0 D driver="Prism2 PCMCIA"

1 D driver="3com 3c59x PCI"

*the pcmcia card detect in driver list.

[admin@MikroTik] > interface print
Flags: X - disabled, D - dynamic, R - running
# NAME TYPE RX-RATE TX-RATE MTU
0 R ether1 ether 0 0 1500

*the prism not show in my interface.

any one have sugestion for my problem

thanks.

any one help for this problem..? or more detail, thanks for all

I have some problem.

This configuration work fine with sisela floppy.

any one help for this problem?