Page 1 of 1
SNR value in 2.9.11 wireless-test
Posted: Sun Jan 15, 2006 11:08 am
by Lorzelek
As I see we have new value in this version. Seeing noise on links will be great. When this option will be available in stable version?
great work!
Peter
Posted: Sun Jan 15, 2006 4:17 pm
by rickard
I wonder how they did becourse its not supported by Atheros ??.
but it seems to work
. im running 2.9.11 Wireless test in my production network
and it still works fine.
And the Noise floor is -95 Dbm... and the cpu load is lower...
Posted: Sun Jan 15, 2006 8:22 pm
by Lorzelek
hmm, so why other vendors of hardware APs (with atheros onboard) have noise level measurement (CA-8A, Proxim Tsunami, Osbridge5)?
Posted: Thu Jan 26, 2006 11:18 pm
by canram
I think its a difference in the used drivers
2.9.11 wireless-test stable?
Posted: Mon Jan 30, 2006 7:53 am
by altaphon
Heard a lot of complaints that wireless-test was not happy on 2.9.10. Is it OK with .11?
Posted: Mon Jan 30, 2006 9:01 pm
by rickard
It working werry well
i have uppgrading 30 ap with the wireless test.npk and it have been working without failure
And the signal is better and the speed. and if im using the MT radio card
i have SNR and noise readings.
//Rickard
Posted: Sun Feb 05, 2006 10:24 pm
by rastod
I can't see noise level value. Where is it?
Posted: Sun Feb 05, 2006 10:29 pm
by cibernet
I can't see noise level value. Where is it?
On terminal: interface>wireless>monitor
Regards
Posted: Mon Feb 06, 2006 12:55 am
by rastod
thanks
Posted: Mon Feb 06, 2006 1:00 am
by cibernet
thanks
Posted: Mon Feb 06, 2006 1:03 am
by rastod
ops, sorry, I can't see it. Is it available in Ap mode? I am running 2.9.12 with atheros miniPCI. I see only:
[admin@mikrotik_dsinama] interface wireless> monitor ap_dsinama
status: running-ap
band: 2.4ghz-b
frequency: 2437MHz
overall-tx-ccq: 69%
registered-clients: 10
nstreme: no
current-tx-powers: 1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:0,9Mbps:0,
12Mbps:0,18Mbps:0,24Mbps:0,36Mbps:0,48Mbps:0,54Mbps:0
Posted: Mon Feb 06, 2006 1:17 am
by cibernet
ops, sorry, I can't see it. Is it available in Ap mode? I am running 2.9.12 with atheros miniPCI. I see only:
[admin@mikrotik_dsinama] interface wireless> monitor ap_dsinama
status: running-ap
band: 2.4ghz-b
frequency: 2437MHz
overall-tx-ccq: 69%
registered-clients: 10
nstreme: no
current-tx-powers: 1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:0,9Mbps:0,
12Mbps:0,18Mbps:0,24Mbps:0,36Mbps:0,48Mbps:0,54Mbps:0
I see this:
status: running-ap
band: 5ghz
frequency: 5765MHz
noise-floor: -101dBm
registered-clients: 1
authenticated-clients: 1
current-ack-timeout: 25
current-distance: 25
nstreme: no
current-tx-powers: 6Mbps:19,9Mbps:19,12Mbps:19,18Mbps:19,24Mbps:19,36Mbps:15,48Mbps:14,54Mbps:13
notify-external-fdb: no
Regards
Posted: Tue Feb 07, 2006 1:38 am
by eflanery
One thing I would still really like to see, is histograms for Signal, Noise, and SNR, in the wireless interface and registration table entries.
Similar to the nice "traffic" graphs given for all interfaces (and some other things).
--Eric