Community discussions

MikroTik App
 
hci
Long time Member
Long time Member
Topic Author
Posts: 679
Joined: Fri May 28, 2004 5:10 pm

Cellular Internet Access?

Tue Nov 27, 2012 7:09 pm

Is there a USB device that will plug right in say a RB751 and allow access to Internet over the cellular network on say Verison or AT&T with an account? Has anyone done this?
 
User avatar
Intrepid
newbie
Posts: 38
Joined: Sat Feb 12, 2011 1:20 am

Re: Cellular Internet Access?

Tue Nov 27, 2012 10:22 pm

Hi!

I use a ZTE LTE MF820D(i think) USB modem in a RB411U, and i get my data over a celluar network.
Now i have weak signal, but i still get 11,42 mbits download, and 10,02 mbits upload speed.

take a look at this:
http://wiki.mikrotik.com/wiki/Supported ... e#3G_cards
 
Dobby
Member
Member
Posts: 399
Joined: Wed Jan 11, 2012 12:07 am
Location: Hogwarts

Re: Cellular Internet Access?

Tue Nov 27, 2012 10:54 pm

Deleted because not related.
Last edited by Dobby on Mon Mar 11, 2013 3:01 am, edited 1 time in total.
 
hci
Long time Member
Long time Member
Topic Author
Posts: 679
Joined: Fri May 28, 2004 5:10 pm

Re: Cellular Internet Access?

Sat Dec 08, 2012 1:00 am

Got a Novatel USB551L for Verizon. It works fine on Windows PC. When I plug it into a Routerboard 751U-2HnD the router finds it. Mikrotik gives options of:

PIN
User
Password
Remote Address

What do I do with all these to get it working?
 
hci
Long time Member
Long time Member
Topic Author
Posts: 679
Joined: Fri May 28, 2004 5:10 pm

Re: Cellular Internet Access?

Tue Dec 11, 2012 11:03 pm

Bump.
 
ibm390s
just joined
Posts: 10
Joined: Wed Dec 23, 2009 10:26 am
Location: RO

Re: Cellular Internet Access?

Tue Dec 11, 2012 11:09 pm

First gather all the data from the Windows application. You need to disable the PIN code check on the SIM if you have one. It's easier to use it without PIN. Next you should obtain the APN for the connection. It's saved in the Windows app in the profile. If username & password is used also get those ones as well. Next fill the following tabs: APN, Username & Password (if you have these configured in the windows app) and enable the ppp-client. Before you can modify the logger and insert debug to memory to be able to read all the debug messages for both async and ppp.