Page 1 of 1
AR5213+AR2112 + nstreme rev13
Posted: Sat Aug 21, 2004 1:33 am
by GeTe
Hello
Normal wireless package :
bandwih-test direction=both protocol=TCP > rx/tx = 13mbit
Nstreme 13:
-nstreme disable
mode=2,4ghz-g-turbo > rx/tx=600kbps
mode=2,4ghz-onlyg > rx/tx=1,2mbit
-nstreme enable
mode=2,4ghz-g-turbo > rx/tx=600kbps
mode=2,4ghz-onlyg > rx/tx=3mbit
why ?
Posted: Tue Aug 24, 2004 3:25 pm
by mp3turbo2
yeah, I observed very similar behaviour. So far, nstreme with g-turbo is not the best combination. BTW, you have to have excellent signal for g-turbo to function properly with full transfer, don't count on -78dB !!
for mikrotik company : this is our official statement :
so far, we found the fastest g-turbo to be around 3.5MB/s {despite of 80Mbit/s UDP test throughput !} and classic g to achieve around 3MB/s {UDP transfer : around 45Mbit/s}. Why real throughput is not doubled, nobody can tell. Of course, we are NOT limited by CPU performance, we don't use routerboards, wrap's etc, we use ATX computers and 800MHz Celeron has plenty of power for these operations - they are running at around 20% :)
Posted: Tue Aug 24, 2004 3:41 pm
by dorijan
wel...with superG with ap2000 and g520 on I managed to get about 4 mb/s on distance about 700 meters..
of course, nothing else worked then...