At our NOC we have;
FIBER --> RB250 --> (ETHER1)-RB1200-(ETHER10) --> RB250 --> CERAGON LICENCED LINK
I can not seem to be able to get any more than 30Mb tcp traffic out of the rb1200.
When I plug my laptop into the RB250 at ether10 and run the bandwidth test on my xp machine, I can only get 30Mb download and 6.9Mb upload using the inbuilt speed test in the MT box.
I gave ether5 an ip and connected directly in to it with my laptop and was able to get 90+ Mb up and down.
I have, however noticed something strange on ether10.....a lot of pauses. What is this caused by?
Throughput issue with rb1200
You do not have the required permissions to view the files attached to this post.
Re: Throughput issue with rb1200
Try on ether1-8, it solves the problem.At our NOC we have;
FIBER --> RB250 --> (ETHER1)-RB1200-(ETHER10) --> RB250 --> CERAGON LICENCED LINK
I can not seem to be able to get any more than 30Mb tcp traffic out of the rb1200.
When I plug my laptop into the RB250 at ether10 and run the bandwidth test on my xp machine, I can only get 30Mb download and 6.9Mb upload using the inbuilt speed test in the MT box.
I gave ether5 an ip and connected directly in to it with my laptop and was able to get 90+ Mb up and down.
I have, however noticed something strange on ether10.....a lot of pauses. What is this caused by?
Re: Throughput issue with rb1200
That done the job - I can not believe my eyes! Explain please 
I have also turned off flow control on the rb250's before I made your suggested changes and it stopped the pauses.
Should I re-enable them?
Re: Throughput issue with rb1200
The 1200's ether10 have a hardware(?) bug, it causes this problem. Search for this problem on a forum and you get answer for this problem.
I have also turned off flow control on the rb250's before I made your suggested changes and it stopped the pauses.
Should I re-enable them?
-
-
brasileottanta
Member Candidate
- Posts: 122
- Joined:
Re: Throughput issue with rb1200
Hi ,The 1200's ether10 have a hardware(?) bug, it causes this problem. Search for this problem on a forum and you get answer for this problem.
I have also turned off flow control on the rb250's before I made your suggested changes and it stopped the pauses.
Should I re-enable them?
really ????
thank's