I have a serious problem with ROS. I have a Cisco 7200 that I want to (partially) replace with a RB1100AHx2. The C7200 terminates some hundereds of PPPoE connections.
The problem is that if I try to connect an Asus RT-N10E, it can't. I have the problem also with other kind of routers (for example with some old Netgear).
I have tried also with a RB951G-2HnD, with 5.22 and 6.0rc9, with same results.
With C7200 I have no problems!
This is RB log:
Code: Select all
00:03:09 pppoe,debug,packet ether2: rcvd PADI from 08:60:6E:5B:83:19
00:03:09 pppoe,debug,packet session-id=0x0000
00:03:09 pppoe,debug,packet service-name=
00:03:09 pppoe,debug,packet host-uniq=0x32f
00:03:09 pppoe,debug,packet ether2: sent PADO to 08:60:6E:5B:83:19
00:03:09 pppoe,debug,packet session-id=0x0000
00:03:09 pppoe,debug,packet host-uniq=0x32f
00:03:09 pppoe,debug,packet service-name=
00:03:09 pppoe,debug,packet ac-name=MikroTik
00:03:09 pppoe,debug,packet ether2: rcvd PADR from 08:60:6E:5B:83:19
00:03:09 pppoe,debug,packet session-id=0x0000
00:03:09 pppoe,debug,packet service-name=
00:03:09 pppoe,debug,packet host-uniq=0x32f
00:03:09 pppoe,info PPPoE connection established from 08:60:6E:5B:83:19
00:03:09 pppoe,ppp,info <pppoe-0>: waiting for call...
00:03:09 pppoe,ppp,debug <0004>: LCP lowerup
00:03:09 pppoe,ppp,debug <0004>: LCP open
00:03:09 pppoe,debug,packet ether2: sent PADS to 08:60:6E:5B:83:19
00:03:09 pppoe,debug,packet session-id=0x0004
00:03:09 pppoe,debug,packet host-uniq=0x32f
00:03:09 pppoe,debug,packet service-name=
00:03:10 pppoe,ppp,debug <0004>: LCP timer
00:03:10 pppoe,ppp,debug,packet <0004>: sent LCP ConfReq id=0x1
00:03:10 pppoe,ppp,debug,packet <mru 1480>
00:03:10 pppoe,ppp,debug,packet <magic 0x6e871601>
00:03:10 pppoe,ppp,debug,packet <auth chap>
00:03:11 pppoe,ppp,debug <0004>: LCP timer
00:03:11 pppoe,ppp,debug,packet <0004>: sent LCP ConfReq id=0x2
00:03:11 pppoe,ppp,debug,packet <mru 1480>
00:03:11 pppoe,ppp,debug,packet <magic 0x6e871601>
00:03:11 pppoe,ppp,debug,packet <auth chap>
00:03:13 pppoe,ppp,debug <0004>: LCP timer
00:03:13 pppoe,ppp,debug,packet <0004>: sent LCP ConfReq id=0x3
00:03:13 pppoe,ppp,debug,packet <mru 1480>
00:03:13 pppoe,ppp,debug,packet <magic 0x6e871601>
00:03:13 pppoe,ppp,debug,packet <auth chap>
00:03:13 pppoe,ppp,debug,packet <0004>: rcvd LCP ConfReq id=0x1
00:03:13 pppoe,ppp,debug,packet <mru 1480>
00:03:13 pppoe,ppp,debug,packet <magic 0x1a0f2149>
00:03:13 pppoe,ppp,debug,packet <0004>: sent LCP ConfAck id=0x1
00:03:13 pppoe,ppp,debug,packet <mru 1480>
00:03:13 pppoe,ppp,debug,packet <magic 0x1a0f2149>
00:03:15 pppoe,ppp,debug <0004>: LCP timer
00:03:15 pppoe,ppp,debug <0004>: LCP timeout sending ConfReq
00:03:15 pppoe,ppp,debug <0004>: LCP lowerdown
00:03:15 pppoe,ppp,info <pppoe-0>: terminating...
00:03:15 pppoe,debug,packet ether2: sent PADT to 08:60:6E:5B:83:19
00:03:15 pppoe,debug,packet session-id=0x0004
00:03:15 pppoe,debug,packet relay-session-id=
00:03:15 pppoe,ppp,debug <0004>: LCP lowerdown
00:03:15 pppoe,ppp,debug <0004>: LCP down event in starting state
00:03:15 pppoe,ppp,info <pppoe-0>: disconnected
00:03:33 interface,info ether2 link down
