SXT Lite 5 working on 10mhz.
Posted: Mon Mar 25, 2013 9:37 pm
I'm not able to work with this equipment at 10mhz.
Mode AP:
Code: Select all
/interface wireless
set 0 adaptive-noise-immunity=client-mode band=5ghz-onlyn basic-rates-a/g="" bridge-mode=disabled channel-width=10mhz country=brazil disabled=no frequency=5300 \
frequency-mode=superchannel ht-basic-mcs=mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15 ht-rxchains=\
0,1 ht-supported-mcs=mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15 ht-txchains=0,1 \
hw-protection-mode=rts-cts hw-retries=15 l2mtu=2290 mode=ap-bridge preamble-mode=short radio-name=MikroTik rate-set=configured supported-rates-a/g="" \
wireless-protocol=nv2-nstreme
/interface wireless nstreme
set wlan1 disable-csma=yes enable-nstreme=yes framer-policy=exact-size
Code: Select all
/interface wireless
set 0 adaptive-noise-immunity=client-mode band=5ghz-onlyn basic-rates-a/g="" channel-width=10mhz country=brazil disabled=no frequency-mode=superchannel \
ht-basic-mcs=mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15 ht-rxchains=0,1 ht-txchains=0,1 \
hw-protection-mode=rts-cts hw-retries=15 l2mtu=2290 name=wlan1-gateway rate-set=configured scan-list=5300 supported-rates-a/g="" wireless-protocol=\
nv2-nstreme
/interface wireless nstreme
set wlan1-gateway disable-csma=yes framer-policy=exact-size
Does anyone have any idea what can be?
doesn't work with small channels.