MikroTik

is there anything different with r6 compared to r5 in how configs are saved to routeros?
I am constantly getting issues with perticularly bridge interfaces just vaninishing


on 5.x it never ever ever happens
but on r6 it happens all the time, its literally happen to me about 100 times

I have a load of these issues over 5 servers x86
I know r6 is still beta, but I have found no one who has complained about this

So i want to offically make it know there is some kinda issue here

I think the key to the issue is all 2 of my servers are usb stick installed.
There tottaly different servers and platforms

I no longer agree that usb is capable of handling ros.... i just dont know why i only know that i am loosing my configs all the time

almost always is the bridge interface that disapears, the ports that were members of the bridge get reset and are members of "unknown" due to this

Staff please i would like some feedback about this

this is my issue, I am hoping to get these converted to a real hard drive... or the issue fixed? or maybe just feedback

I also have such problem with one of my PC-based router - but only one... After reboot all bridges disapear.