Page 1 of 1
simple queue small problem
Posted: Sat Mar 04, 2006 9:14 am
by Gotmoh
Hi all.
I created simple queue for an user. Then created another one as child for previous queue. Now parent and child counters doesnt show any activity (but when using torch I can see packet moves at this queues (both)). Was try use higher priority for child queue but dont work. Any ideas?
Posted: Sat Mar 04, 2006 5:43 pm
by Hugh Hartman
Please post the actual rules
Posted: Sat Mar 04, 2006 6:25 pm
by Gotmoh
ok. this is it.
parent queue :
add name="xxxxxxx Rafal 1" target-addresses=192.168.9.154/32 \
dst-address=0.0.0.0/0 interface=all parent=none direction=both priority=8 \
queue=default/default limit-at=1000000/1000000 max-limit=1000000/1000000 \
burst-limit=1356000/1768000 burst-threshold=128000/384000 \
burst-time=5s/20s total-queue=default disabled=no
and second (child) queue
add name="xxxxxxx Rafal 2" \
target-addresses=192.168.9.190/32 dst-address=0.0.0.0/0 interface=all \
parent="xxxxxxx Rafal 1" direction=both priority=7 \
queue=default/default limit-at=256000/512000 max-limit=512000/512000 \
burst-limit=1000000/1000000 burst-threshold=256000/256000 \
burst-time=5s/20s total-queue=default disabled=no
Posted: Sun Mar 05, 2006 5:54 pm
by dot-bot
When I tried the same thing I had the same problem (as well as tons and tons of unexpected behaviour when I tried different things from the forum etc. etc...)