Page 1 of 1
2.9.14 wireless problem
Posted: Tue Mar 07, 2006 1:50 pm
by djdodo
i have client at 5500MHz,signal is -59db, 3x per day is TCP/IP communication between two sides dead.If i disable/enable CM9 on client side,so all works fine. In 2.9.13 and previous version is not this problem !!!
Posted: Tue Mar 07, 2006 6:20 pm
by uldis
please make the support output file before disabling the interface and send it to
support@mikrotik.com.
Also have you checked the periodical-calibration setting.
Posted: Tue Mar 07, 2006 7:16 pm
by djdodo
Dear uldis, Periodic calibration is on 01:00:00 and DEFAULT.
please make the support output file before disabling the interface and send it to
support@mikrotik.com.
Also have you checked the periodical-calibration setting.
Posted: Wed Mar 08, 2006 11:14 am
by tully
Our routers show 60s as default. Maybe it was a number from an older router that was upgraded. A new install should have 60s as default.
John
re
Posted: Fri Mar 10, 2006 1:02 am
by djdodo
problem was solved: this feature is manualy DISABLED and all works fine, now i test 2.9.16:)