For some reason I can only connect one device to this access point. When I created VirtualAP I was able to connect one device to wlan1 and second device to VirtualAP. THATS IT! No meter what I tried I can't get it to connect multiple computers.
PLEASE HELP!!! I have three of them mounted already up high in the studio.
License Level 4
Export compact from one of them:
Code: Select all
# may/01/2013 12:37:58 by RouterOS 5.24
# software id = BETI-P051
#
/interface bridge
add admin-mac=D4:CA:6D:2D:7C:7A auto-mac=no l2mtu=1598 name=bridge-local \
protocol-mode=rstp
/interface wireless
set 1 antenna-gain=6 band=2ghz-b/g country=canada disabled=no frequency=2422 \
hide-ssid=yes l2mtu=2290 mac-address=D4:CA:3D:2B:75:24 mode=bridge ssid=\
wifi777 wireless-protocol=802.11
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk eap-methods=passthrough \
group-key-update=1h mode=dynamic-keys supplicant-identity=MikroTik \
unicast-ciphers=tkip,aes-ccm wpa-pre-shared-key=wifi1234
add authentication-types=wpa-psk eap-methods=passthrough group-key-update=10m \
mode=dynamic-keys name=FX1 supplicant-identity="" wpa-pre-shared-key=\
fxstudio
/interface wireless
add area="" arp=enabled bridge-mode=enabled default-ap-tx-limit=0 \
default-authentication=yes default-client-tx-limit=0 default-forwarding=\
yes disable-running-check=no disabled=no hide-ssid=no l2mtu=2290 \
mac-address=D6:3A:6D:33:8C:7B master-interface=wlan1 max-station-count=\
2007 mtu=1500 multicast-helper=default name=FXStudioE \
proprietary-extensions=post-2.9.25 security-profile=FX1 ssid=\
FXStudio-East update-stats-interval=disabled wds-cost-range=0 \
wds-default-bridge=none wds-default-cost=0 wds-ignore-ssid=no wds-mode=\
disabled wmm-support=disabled
/ip hotspot user profile
set [ find default=yes ] idle-timeout=none keepalive-timeout=2m
/ip pool
add name=pool103 ranges=192.168.103.50-192.168.103.250
/ip dhcp-server
add address-pool=pool103 disabled=no interface=FXStudioE lease-time=4h name=\
dhcp103
/interface bridge port
add bridge=bridge-local interface=ether1
add bridge=bridge-local interface=wlan1
/ip address
add address=10.77.7.3/24 interface=bridge-local
add address=192.168.103.1/24 interface=FXStudioE
/ip dhcp-server network
add address=192.168.103.0/24 dns-server=8.8.8.8,208.67.222.222,8.8.4.4 \
gateway=192.168.103.1
/ip dns
set allow-remote-requests=yes max-udp-packet-size=512 servers=\
8.8.8.8,208.67.222.222,4.4.4.4
/ip dns static
add address=192.168.88.1 name=router
/ip firewall nat
add action=masquerade chain=srcnat src-address=192.168.103.0/24
/ip neighbor discovery
set FXStudioE disabled=yes
set wlan1 disabled=yes
/ip proxy
set max-cache-size=none
/ip route
add distance=1 gateway=10.77.7.1
/ip service
set ftp disabled=yes
set www port=10083
set ssh disabled=yes
/system clock
set time-zone-name=America/Toronto
/system identity
set name=FXE3
/system leds
set 1 interface=ether1
/system ntp client
set enabled=yes mode=unicast primary-ntp=17.171.4.23 secondary-ntp=\
189.213.107.202
/tool graphing interface
add interface=ether1 store-on-disk=no
/tool graphing resource
add store-on-disk=no
