MikroTik

Posted: **Wed Jun 05, 2013 9:59 pm**

Hello,
my network topology looks like this: ISP-RouterA-routerB-Sector Antennas. On both routers I use NAT. The ISP has given me 1 global IP address. But as the number of my custommers on sectors have grown, I asked the ISP to give me more IP adddresses and they agreed.
I plan to remove NAT on router B to allow each sector custommers use one global IP. But I am not sure how to do this. Can you please suggest me something?

Posted: **Wed Jun 05, 2013 10:19 pm**

You have 3 methods to choose from... I suggest you use which ever you are most comfortable with.

1. PPPoE
http://wiki.mikrotik.com/wiki/PPPOE_Server
2. DHCP
This is what you do now except with public addresses NO NAT, NO Masquerade.
3. 1 to 1 NAT
http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT (1 to 1 Nat at the bottom of the page)

If you would like to choose a method then ask for an explanation it would be easier than explaining them all.

Posted: **Wed Jun 05, 2013 11:08 pm**

Thanks,
I think I will use 1 to 1 NAT as I am more familiar with it.

MikroTik

Change NAT

Change NAT

Re: Change NAT

Re: Change NAT