Page 1 of 1
Mikrotik 6 and ZPH queue
Posted: Mon Sep 16, 2013 6:57 am
by cicserver
I recently upgraded to ver 6.x and the ZPH queue tree no longer working.
How to get it running again? what rule?
Re: Mikrotik 6 and ZPH queue
Posted: Tue Sep 17, 2013 6:21 pm
by cbrown
ZPH queue tree? Please provide more details and it would also be helpful to post your configuration with /export
Re: Mikrotik 6 and ZPH queue
Posted: Wed Sep 18, 2013 3:49 pm
by deejayq
ZPH for squid?
if that's the case it translates to packets being marked with dscp.
Re: Mikrotik 6 and ZPH queue
Posted: Thu Nov 28, 2013 10:26 pm
by HackXBack
up ++
we need a solution to this problem,
we was making this with this rules in v5
/ip firewall mangle add action=mark-packet chain=prerouting disabled=no dscp=12 new-packet-mark=proxy-hit passthrough=no comment="Iphobos.com / "
/queue tree add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name=pmark packet-mark=proxy-hit parent=global-out priority=8 queue=default
but now .. there is'nt global-out in queue tree and if i put global it didn't work fine !!
so please we need help for this problem
Re: Mikrotik 6 and ZPH queue
Posted: Sat Nov 30, 2013 1:14 pm
by alieassaeng
I think everyone is suffering from the same issue....
Is there a V5 for the CCR routerboards??