Page 1 of 1
help!
Posted: Wed Sep 18, 2013 3:18 am
by hawkeyebj
I have 72 something customers on a rb411ah running v 5.25 in ap-bridge mode and my data rates set at 24 for stability but Im only getting 10 to 14m max to about 3 of the 72 clients but its one way if TX is full there's no bandwidth to the rx side and vise versa. Any thoughts would be greatly appreciated.
Re: help!
Posted: Wed Sep 18, 2013 1:30 pm
by Lakis
U ruining only A set data rates to default maybe some clients cant work good on 24mbit rate
try nv2
Re: help!
Posted: Wed Sep 18, 2013 3:28 pm
by hawkeyebj
No. I already have nv2 running. 98% of all my customers have excellent connections but no real bandwidth and its the same for any of the other wireless protocols as well. Also most of the clients are about 6 km or less away from the access point and the cell radius is set so that's out of the question. The only thing I forgot to mention earlier is this is a 5ghz AP were using and it is Ubnt 2x2 MIMO Dual Polarity 5Ghz Omni.