Page 1 of 1
wireless integration problems, proxim/MT
Posted: Tue Apr 04, 2006 8:35 am
by G-lox
One of my clients has a proxim based 5.8GHz WISP already in place and I'd like to add MT boards on to the existing network. I have tried all the basics, same frequency and ssid, made sure all the settings on the ap and the cpe are the same. AP is a proxim and cpe is a 112. These should be both on the 802.11a standard but I get no registration on the MT side, ap is the same. Is there something I am missing or are the two companies more proprietary than they want to admit?
Posted: Tue Apr 04, 2006 8:52 am
by jarosoup
Proxim uses their own OR_Worp protocol on the MP11a. I don't think it is compatible with regular 802.11a. I think the AP4000 is standard 11a though...which do you have?
proxims
Posted: Tue Apr 04, 2006 9:55 am
by G-lox
The backbone net is MP11a's. It wouldn't surprise me if it was proprietary. I am using AP4000 in limited customer situations but I have been replacing them with cheaper hardware, linksys ap's, as we have been expanding.
Posted: Tue Apr 04, 2006 8:45 pm
by Arco van Bezooijen
I'm 100% sure MP11(a) uses the Wireless Outdoor Router Protocol (WORP). There is no way to mix this with MT.
Thanks
Posted: Wed Apr 05, 2006 8:50 am
by G-lox
The MP11A does use worp, i didn't realize that was a separate protocol to standard 802.11a. Thanks for the info.