Change the default 192.168.88.1 configuration to 192.168.1.1
Posted: Tue Nov 26, 2013 5:25 pm
by Pirlet
Hello,
I've followed the guide
http://networkingforintegrators.com/201 ... hcp-range/
but the problem is that I can translate to an adress, but I cannot ping...
I also can't surf. How can I fix this?
Re: Change the default 192.168.88.1 configuration to 192.168
Posted: Tue Nov 26, 2013 6:29 pm
by stmx38
Pirlet
You can try to verify your settings with
Quickset
Re: Change the default 192.168.88.1 configuration to 192.168
Posted: Tue Nov 26, 2013 7:44 pm
by efaden
Re: Change the default 192.168.88.1 configuration to 192.168.1.1
Posted: Wed Mar 02, 2016 6:24 am
by waleeedijaz
but the problem is that I can translate to an adress, but I cannot ping...
Re: Change the default 192.168.88.1 configuration to 192.168.1.1
Posted: Thu Mar 03, 2016 9:53 pm
by Steveocee
but the problem is that I can translate to an adress, but I cannot ping...
Make sure you are adding the subnet mask on the end. I did this setting something up recently and it stumped me.
**192.168.1.1/24
***not 192.168.1.1