IPIP Tunnel Cannot Ping
Posted: Tue Dec 24, 2013 5:40 pm
I'm posting a new issue just for this please. I'm trying to set up an IPIP tunnel, as basic one. I used the link:
http://wiki.mikrotik.com/wiki/Manual:Interface/IPIP
But our set up is different since it is behind a CISCO router and the tutorial is for public to public IP. Our set up is this:
RouterOS --- CISCO ---- Internet(IPSEC) ----- Client Mikrotik
RouterOS:
LAN: 192.168.8.1
WAN: 192.168.230.246(yes this is still private)
CISCO:
LAN:192.168.230.1
WAN:x.x.x.x (some public IP)
How do I set up IPIP tunnel where my RouterOS is behind a NATTED network please? This is what I have for config.
http://wiki.mikrotik.com/wiki/Manual:Interface/IPIP
But our set up is different since it is behind a CISCO router and the tutorial is for public to public IP. Our set up is this:
RouterOS --- CISCO ---- Internet(IPSEC) ----- Client Mikrotik
RouterOS:
LAN: 192.168.8.1
WAN: 192.168.230.246(yes this is still private)
CISCO:
LAN:192.168.230.1
WAN:x.x.x.x (some public IP)
How do I set up IPIP tunnel where my RouterOS is behind a NATTED network please? This is what I have for config.
Code: Select all
[admin@TestOS] /interface ipip> pr
Flags: X - disabled, R - running, D - dynamic
# NAME MTU LOCAL-ADDRESS REMOTE-ADDRESS
0 R ipipTest 1480 192.168.230.246 xx.xx.xx.xx