Page 1 of 1
routeros 6.9 (release candidate)
Posted: Thu Jan 30, 2014 12:44 pm
by mietus
What's new in 6.9 (2014-Jan-30 10:23):
*) updated bootloader firmware;
*) ppp: fixed RADIUS accounting;
*) ppp: fixed IPV6-Prefix assigning;
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:13 pm
by saaremaa
What's new in 6.9 (2014-Jan-30 10:23):
*) ppp: fixed RADIUS accounting;
I сonfirm. It work.
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:18 pm
by p2systems
What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
*) updated bootloader firmware;
*) ppp: fixed RADIUS accounting;
*) ppp: fixed IPV6-Prefix assigning;
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:25 pm
by normis
v6.9 also includes these changes from the unreleased v6.8:
What's new in 6.8 (2014-Jan-29 15:52):
*) bridge - default protocol-mode changed to RSTP for new bridges,
fixed bridge mac address changing when port (with lowest mac address) goes down
*) userman - improve startup time;
*) sstp client - support server name verification from certificate;
*) wireless - improved 11n and nv2 stability;
*) dhcp client - support interfaces in bridge;
*) dhcp - parse decimal strings and IP addreses in options value;
*) bgp - don't show community 'internet' in BGP advertisements;
*) ipsec - enable hardware acceleration for aes-cbc + md5|sha1|sha256 aead on tilera cpus;
*) ospf - fixed checksum calculation for OSPFv3 AS-external-LSAs;
*) default configuration - changed dhcp server lease time to 10 minutes;
*) fixed port isolation on CRSs (bug introduced in v6.6);
*) smb - added support for SMB 2.002
*) timezone information updated;
*) ppp - fixed ppp bridging (did not work since v6.6);
*) improved speed of PPP, PPPoE, PPTP & L2TP on multicore routers;
*) address-list - fix crash when adding two identical address list entries (not allowed any more);
*) fixed multicast forwarding on CCRs;
*) firewall - improved address-type matcher, and added it for ipv6 aswell;
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:26 pm
by rzirzi
What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
...
What for?!
MiktoTik team should concentrate to improve main features, like wireless radio performance and stability!
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:28 pm
by normis
What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
...
What for?!
MiktoTik team should concentrate to improve main features, like wireless radio performance and stability!
You did not see the other changes, did you ?
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:37 pm
by Masyanich
link for tile PZ!
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:38 pm
by tournet
where to download v6.9?
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:39 pm
by rzirzi
You did not see the other changes, did you ?
Of couse I have seen, but this wasted time should be purposed to improve main features of RouterOS (wireless, routing), but not colour-scheme. It's not a toy for a childrens.
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:40 pm
by JanezFord
where to download v6.9?
Exactly ... on mikrotik webpage you can find only 6.7 and check for updates from router reports error - file not found...
?
JF.
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:47 pm
by normis
link for tile PZ!
Do you have internet connectivity ?
Re: routeros 6.9
Posted: Thu Jan 30, 2014 2:47 pm
by normis
v6.9 is not released yet.
Re: routeros 6.9
Posted: Thu Jan 30, 2014 3:08 pm
by Diamond
link for tile PZ!
+1
Re: routeros 6.9
Posted: Thu Jan 30, 2014 3:29 pm
by doneware
What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
...
What for?!
ehm, we really customise outfit of the boxes placed to the customers.
our logo has white background, and even if i customise the LCD boot screen,
it does not affect the whole screen, i had black stripes over and under the company
logo. i hope this setting fixes it.
another aspect:
before the CRS it was crystal clear: dark boxes had dark colour schemes,
whereas the CCRs had white. and it was chosen automatically by routerOS.
then the CRS hit the surface in this all-white-bathroom-style colour, but with
dark LCD colour scheme by default. and unchangeable of course.
right now we have the possibility to fix this
i don't think it was of any difficulties to fix this, as the colour schemes were there anyway.
Re: routeros 6.9
Posted: Thu Jan 30, 2014 3:32 pm
by server8
*) wireless - improved 11n and nv2 stability;
Exactly what kind of improvements?
Thank You Giuseppe
Re: routeros 6.9
Posted: Thu Jan 30, 2014 3:34 pm
by mistry7
What's new in 6.9 (2014-Jan-30 10:23):
*) ppp: fixed RADIUS accounting;
I сonfirm. It work.
for me too
Re: routeros 6.9
Posted: Thu Jan 30, 2014 3:40 pm
by mietus
*) wireless - improved 11n and nv2 stability;
Exactly what kind of improvements?
Thank You Giuseppe
read 6.8rc1 thread.
in short: some possible nv2 lockups/crash are fixed and also speed for the 802.11n might be more stable.
Re: routeros 6.9
Posted: Thu Jan 30, 2014 4:59 pm
by petro25
Re: routeros 6.9
Posted: Thu Jan 30, 2014 5:31 pm
by mietus
Re: routeros 6.9
Posted: Thu Jan 30, 2014 8:02 pm
by ropeba
What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
...
What for?!
MiktoTik team should concentrate to improve main features, like wireless radio performance and stability!
You did not see the other changes, did you ?
Normis, I do not see IGMP bug fix, and it exists since IGMP Proxy exists in MikroTik. I reported busg's a few years ago!
Re: routeros 6.9
Posted: Thu Jan 30, 2014 11:52 pm
by skibi82
Re: routeros 6.9
Posted: Fri Jan 31, 2014 4:13 am
by ekaiser
We did not see any change in the port isolation on CRS using version 6.8rc1, it was still spewing traffic on other ports.
Re: routeros 6.9
Posted: Fri Jan 31, 2014 6:30 am
by tgcnet
ping pppoe stations still remain high, in versions prior to 6.6 ping stands at 1ms, the new 6.9 versions ping is unstable high ..
Re: routeros 6.9
Posted: Fri Jan 31, 2014 8:04 am
by Masyanich
I was quite confused. Version 6.8 is not brought before the release, but there is version 6.9. Stated bug fixes do not work. What's going on here at all?
Re: routeros 6.9
Posted: Fri Jan 31, 2014 9:07 am
by macgaiver
v6.8 was in development for 2 month, with big changes coming in PPP for all devices (especially for CCR) and IPSec HW acceleration for CCR and nv2 wireless stability improvements,
I imagine all attention was on those topics.
And when they were about to release (or released version for few hours) found serious bug with BIOS version on some mipsbe boards - if you do "/system routerboard upgrade" with that BIOS you will need to Netinstall the board, to get it back.
I was surprised that BIOS upgrade was such a common feature to find it so quickly...
Anyways, MT switched to v6.9 to avoid confusion and it should be released soon.
ping pppoe stations still remain high, in versions prior to 6.6 ping stands at 1ms, the new 6.9 versions ping is unstable high ..
try with some actual traffic on those tunnels, not just ping - what this link is running on? wireless?
Re: routeros 6.9
Posted: Fri Jan 31, 2014 10:04 am
by normis
I was quite confused. Version 6.8 is not brought before the release, but there is version 6.9. Stated bug fixes do not work. What's going on here at all?
Which bug fixes do not work ?
Re: routeros 6.9
Posted: Fri Jan 31, 2014 12:19 pm
by stavincki1
The IGMP proxy bug is a real problem and it would be nice if you could fix them instead of making the lcd change colors.
Re: routeros 6.9
Posted: Sat Feb 01, 2014 12:46 pm
by Cronex
The IGMP proxy bug is a real problem and it would be nice if you could fix them instead of making the lcd change colors.
Hi all, i can't to reach normal work of IGMP proxy for 2 or more devices.
It's always need to restart IGMP proxy for taking to join for 2 or more multicast group. In MFC i have some garbige.
For one device it working good.
Re: routeros 6.9
Posted: Sat Feb 01, 2014 4:57 pm
by karina
You did not see the other changes, did you ?
Of couse I have seen, but this wasted time should be purposed to improve main features of RouterOS (wireless, routing), but not colour-scheme. It's not a toy for a childrens.
To be fair it is very useful feature as the new setting allows for dark or light scheme. I doubt it took much development time at all
Re: routeros 6.9 (release candidate)
Posted: Sun Feb 02, 2014 6:04 am
by manuelsbc
Re: routeros 6.9
Posted: Sun Feb 02, 2014 6:06 am
by manuelsbc
I was quite confused. Version 6.8 is not brought before the release, but there is version 6.9. Stated bug fixes do not work. What's going on here at all?
Which bug fixes do not work ?
I update my groove from 6.7 to 6.8, and does not start .. that I can do? turns but does not finish starting, I can not access, not reflected in winbox
Re: routeros 6.9 (release candidate)
Posted: Sun Feb 02, 2014 2:41 pm
by ditonet
Re: routeros 6.9 (release candidate)
Posted: Sun Feb 02, 2014 2:43 pm
by efaden
Netinstall
Sent from my SCH-I545 using Tapatalk
Re: routeros 6.9 (release candidate)
Posted: Mon Feb 03, 2014 9:30 am
by makstex
RouterBoard model:750G.
V6.9 Release, upgrade from v6.7, OVPN Server not working!
