Hello,
I have a Groove A-52HPn, routerOS 5.24.
From a 'reset configuration' I go into the wireless interface, and set:
Mode: Station WDS
Band: 5GHz-A
Channel Width: 20MHz
Frequency: 5785
Wireless Protocol: nv2
NV2 Security: Enabled
NV2 Preshared Key: secret
I click apply, and the groove begins to make a clicking sound.
If I disable the wireless interface the sound stops. I have configured about 100 of these grooves, this is the first time I've heard one click like this. Any suggestions?
Thanks!
