Page 1 of 1

More then 4 Wan Load Balancing in RB750GL

Posted: Thu Feb 20, 2014 12:34 pm
by jauza
Dear All I have RB750GL I want to know how we can load balancing more then 4 Wan

Re: More then 4 Wan Load Balancing in RB750GL

Posted: Thu Feb 20, 2014 6:02 pm
by jarda
I would say that there are not enough ports for that.

Sent from Android by Tapatalk.

Re: More then 4 Wan Load Balancing in RB750GL

Posted: Fri Feb 21, 2014 8:34 am
by bysard
Not enough physical ports. But if you were reffereing to WAN as default gateways over e.g. EOIP, VPN, etc. then the answer is yes!

Re: More then 4 Wan Load Balancing in RB750GL

Posted: Fri Feb 21, 2014 11:53 am
by jauza
Not enough physical ports. But if you were reffereing to WAN as default gateways over e.g. EOIP, VPN, etc. then the answer is yes!
Sir i have 6 ADSL link of 4mb each kindly explain me how can i loadbalance in any method

Re: More then 4 Wan Load Balancing in RB750GL

Posted: Tue Feb 25, 2014 8:51 am
by bysard
The simplest way to do this is to use another (1gbit?) 8-port switch and plug it into rb750. Connect all ADSL modems to the switch and create a separate pppoe connection in Mikrotik for each ADSL link. Remove "add default route" and add default routes manually for each pppoe connection with different metrics.

Re: More then 4 Wan Load Balancing in RB750GL

Posted: Tue Feb 25, 2014 9:24 am
by jarda
Can spare one device and electricity if 8-port router is used directly. Then the mentioned switch is not needed.

Sent from Android by Tapatalk.

Re: More then 4 Wan Load Balancing in RB750GL

Posted: Tue Feb 25, 2014 10:20 am
by bysard
He said he wanted to use 750GL. A 15€ switch is still much cheaper then 8-port or more Mikrotik device.

Re: More then 4 Wan Load Balancing in RB750GL

Posted: Wed Feb 26, 2014 2:30 pm
by jauza
He said he wanted to use 750GL. A 15€ switch is still much cheaper then 8-port or more Mikrotik device.
Thanks for your reply dear. i m trying to explain my scenario that i have 6 ADSL modem F@st 2704 http://www.sagemcom.com/EN/products/com ... -2704.html
which providing LAN connection on RJ-45 which I'll connect in 8 port switch, my question is that we use pppoe for WAN,
how can i configure pppoe between mikrotik and f@st 2704,
Kindly explain with thanks.