Ok so first here is my setup....

Cable internet from COX..feeding directly into RB2011uas-in eth-1

ETH-5 is connected to ubiquiti 5.8backhaul to multiple towers...feeding clients on 2.4...each tower has 3 radios for distribution and 1 backhaul

TIK is setup fresh from box...DHCP client from COX....eth-5 removed from bridge local, running hotspot

Hotspot is setup as basic....with 2 users..admin and guest...all logins use the same account guest...no limits...

PROBLEM....

login page sometimes works...sometimes not....I found the "HTTPS" topic and think this is most of that problem....

BIGGEST problem is that browsing is extremely slow.......getting complaints...page cannot be displayed...etc...

any help would be extremely appreciated...

Make a draw from your network infrastruture

what does that mean??

Make a picture from your network infrastructure

Here is my diagram...

Internet in from ISP to eth1 of RB2011uas_in

ETH5 connected to Nanostation M5

Nanostation M5 backhauled to 4 towers to individual M5's

wired to gigabit switch and wired to 3 AP's channels 1,6,11

I think my problem is natting...but not sure what to check to see if this is the problem....

I was told that I have a triple NAT and that is making it slow.....

But please review and give me your comments...

What for IP-range use u?

Is ISP connect with DHCP-client?

How match users?

How match distance between the links

I don't use switches but routerboards for split the network in different ip-ranges.

from ISP to router is 10.1.10.?, dhcp client on router...
local bridge on router is 192.168.88.?
Hotspot is 172.16.0.?

distance from main radio to towers is less then half a kilometer
less than 100 users on average...

Email me please

Ok so with the help of plisken...I have successfully setup BGP....however I have no internet access at the AP's wirelessly...only limited connections.....I have internet at the main router plugged into a bridged port...I can ping 8.8.8.8 from the secondary routers...but not from laptop

Any help would be greatly appreciated trying to learn how to do this...

Have you select "default originate" if installed?

Got it all working good....Thank you so much Plisken for you help.....

Now that it is working good....

I would like to know what extra capabilities or performance can be had by using the microsd card slot with....say a 4gb card....

What exactly can the extra storage space be used for....

The storage can by used for cash DNS.
But this will not improve the performance.
You can let write log files to the storage.
Ore install the dude on it but i have no experience with it.
It is no need to use the storage for power up the performance.