I don't know how to configure static MAC <-> IP relations.
example :
Mac ip
00:88:sf:2s:43:ds 192.168.0.2
I'm sorry about my English.
Lucas
Problem with DHCP under MT
Hi, I have a DHCP configuration problem uner a MT (winbox).
I don't know how to configure static MAC <-> IP relations.
example :
Mac ip
00:88:sf:2s:43:ds 192.168.0.2
I'm sorry about my English.
Lucas
I don't know how to configure static MAC <-> IP relations.
example :
Mac ip
00:88:sf:2s:43:ds 192.168.0.2
I'm sorry about my English.
Lucas
-
-
joeri91942
Frequent Visitor
- Posts: 88
- Joined:
- Location: Sundsvall, Sweden
Try this
/Jörgen
Code: Select all
/ ip dhcp-server lease
add address=192.168.2.73 mac-address=00:11:D8:8E:B0:D5 disabled=no
add address=192.168.2.40 mac-address=00:01:80:32:DF:92 disabled=nook, it's right..., thanks...
but, I have another qastion !
I configue a subnet mask (..../16), like 255.255.0.0
and a MT (in DHCP) give to DHCP client sub 255.0.0.0 , why ?
Can I make a something, to protect a network, that My client's can't change a IP addresses ?
for example, in My network, some laptop have a 192.168.0.4 ip, and I want to make like this, when client change on this lap ip configuration (ex. for 192.168.0.3), then can't connect to network, or something like this?!
one more time thank's for help
Lucas
but, I have another qastion !
I configue a subnet mask (..../16), like 255.255.0.0
and a MT (in DHCP) give to DHCP client sub 255.0.0.0 , why ?
Can I make a something, to protect a network, that My client's can't change a IP addresses ?
for example, in My network, some laptop have a 192.168.0.4 ip, and I want to make like this, when client change on this lap ip configuration (ex. for 192.168.0.3), then can't connect to network, or something like this?!
one more time thank's for help
Lucas
-
-
joeri91942
Frequent Visitor
- Posts: 88
- Joined:
- Location: Sundsvall, Sweden
Set the interface to reply-only and make sure to create the ARP table with the IP/MAC. and.. read the manual....ok, it's right..., thanks...
but, I have another qastion !
I configue a subnet mask (..../16), like 255.255.0.0
and a MT (in DHCP) give to DHCP client sub 255.0.0.0 , why ?
Can I make a something, to protect a network, that My client's can't change a IP addresses ?
for example, in My network, some laptop have a 192.168.0.4 ip, and I want to make like this, when client change on this lap ip configuration (ex. for 192.168.0.3), then can't connect to network, or something like this?!
one more time thank's for help
Lucas
Regards