MikroTik

Posted: **Sun May 04, 2014 10:14 pm**

/tool sms> set receive-enabled=yes keep-max-sms=50 channel=3
failure: Can't change settings while receive-enabled is on!

/tool sms> set receive-enabled=yes

enabled receive
after reboot sms receive disabled. Why ?

/port print
Flags: I - inactive
 #   DEVICE NAME                    CHANNELS USED-BY                  BAUD-RATE
 0          usb1                           1 Serial Console           auto
 1   1:3    usb2                           4 sms tool                 9600

/tool sms> /system resource usb print
 # DEVICE VENDOR                   NAME                  SPEED
 0 1:1    Linux 3.3.5 ehci_hcd     RB400 EHCI            480 Mbps
 1 1:3    HUAWEI Technology        HUAWEI Mobile         480 Mbps

I send sms to my mobile phone
sms received, and RouterBoard received delivery report

Posted: **Fri May 30, 2014 9:59 pm**

Hello,

this is a MikroTik RouterBoard or also called router.
And in normal cases, terms and conditions it is very useful;
- to call your Router and change the configuration
- to send an alarm to the admin (you) if something goes wrong inside of your network

Perhaps a script or two should solve your problem right I mean something like a start
script that is enabling the modem and/or activating the option to send sms.
Or plain find out if this commands that is enabling the function can be made permanent.

MikroTik

How enable receive sms

How enable receive sms

Re: How enable receive sms