2wans via rb951g,, not work,, this's code:
Posted: Mon May 19, 2014 3:20 am
Code: Select all
/ip firewall mangle
add action=mark-connection chain=input in-interface=ether1-WAN1 new-connection-mark=WAN1_conn
add action=mark-connection chain=input in-interface=ether2-WAN2 new-connection-mark=WAN2_conn
add action=mark-routing chain=output connection-mark=WAN1_conn new-routing-mark= to_WAN1
add action=mark-routing chain=output connection-mark=WAN2_conn new-routing-mark= to_WAN2
add action=mark-connection chain=prerouting dst-address-type=!local in-interface=\
bridge-local new-connection-mark=WAN1_conn per-connection-classifier= both-addresses-and-ports:2/0
add action=mark-connection chain=prerouting dst-address-type=!local in-interface=\
bridge-local new-connection-mark=WAN2_conn per-connection-classifier= both-addresses-and-ports:2/1
add action=mark-routing chain=prerouting connection-mark=WAN1_conn in-interface=bridge-local new-routing-mark=to_WAN1
add action=mark-routing chain=prerouting connection-mark=WAN2_conn in-interface=bridge-local new-routing-mark=to_WAN2
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1-WAN1 to-addresses=0.0.0.0
add action=masquerade chain=srcnat out-interface=ether2-WAN2 to-addresses=0.0.0.0
/ip route
add check-gateway=ping distance=1 gateway=ether1-WAN1 routing-mark=to_WAN1
add check-gateway=ping distance=2 gateway=ether2-WAN2 routing-mark=to_WAN2
/ip dhcp-client
add default-route-distance=0 dhcp-options=hostname,clientid interface=ether1-WAN1
add default-route-distance=1 dhcp-options=hostname,clientid interface=ether2-WAN2
how to solve this??
and each one have a different DNS !!
I tried a lot of codes and tried to read and understand them.. but it's a little bit hard
Is there an easy way to understand what's the main idea of how PCC works!sorry for my English
