Page 1 of 1
instalation help need !
Posted: Sun May 21, 2006 5:41 pm
by atila
When boot MT cd(2.9.17 burned from .iso) I got kernel and comand promth. What to do next ?? In earlier version 2.8.26 It bring me setup where I just select MT components and installation is finished.
I think this is simple for anyone
Re: instalation help need !
Posted: Mon May 22, 2006 2:18 am
by cibernet
When boot MT cd(2.9.17 burned from .iso) I got kernel and comand promth. What to do next ?? In earlier version 2.8.26 It bring me setup where I just select MT components and installation is finished.
I think this is simple for anyone
Please.. read :
http://www.mikrotik.com/docs/ros/2.9/guide/basic i think you should use the "SETUP" command
Regards
Posted: Mon May 22, 2006 10:30 am
by Lukasz
Install it (MT) from floppy, it's very easly then some iso's ang cd's...
Open a flopy maker and write a floppy discs ....
then make this very simples command forward ..
P.S. really with floppy i have't problems .
Posted: Mon May 22, 2006 10:31 am
by normis
if you have a floppy drive ...
Posted: Mon May 22, 2006 10:38 am
by cibernet
Install it (MT) from floppy, it's very easly then some iso's ang cd's...
Open a flopy maker and write a floppy discs ....
then make this very simples command forward ..
P.S. really with floppy i have't problems .
It´s a lot easy with the bootable .iso.... but you have to know how to burn a CD
Regards...
re:
Posted: Mon May 22, 2006 1:03 pm
by atila
off course I know how to burn image, it is bootabile cd but I only get command line instead setup on booting. When I start ./setup from /sbin it do something and reboot PC, next time it do a same thing. ..
I have return my 2.8.26 version
, but now I have other problems:) (pptp)
Re: re:
Posted: Mon May 22, 2006 1:05 pm
by normis
When I start ./setup from /sbin it do something and reboot PC
what? setup should start automatically and start the setup application.
Posted: Mon May 22, 2006 1:24 pm
by atila
I know it should, but it is not
Posted: Mon May 22, 2006 1:28 pm
by normis
check your pc, can it boot from other CD? did you write the image correctly? try the CD in different PC (not other, - different)
re:
Posted: Mon May 22, 2006 1:48 pm
by atila
But 2.8.26 working fine, I don't see reason why 2.9.x would not work.
I will try on different PCs, but even it's works I don't have machine
Thanks for your help!
Posted: Mon May 22, 2006 2:22 pm
by normis
if you use CDRW, erase it first. looks like there is something else on the disk too. also don't use multisessions