MikroTik

Hello!
I have a problem with CCR-1016 (memory test failed) What I tried:

1. I have tested both memory modules (in notebook) - passed
2. tested mikrotik with first slot empty - passed
3. tested mikrotik with second slot empty - passed

if I fill all memory slots - test failed

Any help would be much appreciated!

Hello!
I have a problem with CCR-1016 (memory test failed)

Code: Select all

Fill memory with addresses:
  Filling memory...  done
  Testing memory...
   Error in address=0x0000000040000000, W=0x40000000 R=0x3FFFFBC0 X=0x7FFFFBC0 
   Error in address=0x0000000040000004, W=0x40000004 R=0x3FFF0044 X=0x7FFF0040 
   Error in address=0x0000000040000008, W=0x40000008 R=0x3FFFFBC8 X=0x7FFFFBC0 
   Error in address=0x000000004000000C, W=0x4000000C R=0x3FFF00CC X=0x7FFF00C0 
   Error in address=0x0000000040000010, W=0x40000010 R=0x3FFFFBD0 X=0x7FFFFBC0 
   Error in address=0x0000000040000014, W=0x40000014 R=0x3FFF00D4 X=0x7FFF00C0 
   Error in address=0x0000000040000018, W=0x40000018 R=0x3FFFFBD8 X=0x7FFFFBC0 
   Error in address=0x000000004000001C, W=0x4000001C R=0x3FFFFBDC X=0x7FFFFBC0 
   ....

What I tried:

1. I have tested both memory modules (in notebook) - passed
2. tested mikrotik with first slot empty - passed
3. tested mikrotik with second slot empty - passed

if I fill all memory slots - test failed

Any help would be much appreciated!

I'll try to translate my text..

Проблема с прохождением теста памяти.
но:
1. Память тест прошла (в ноутбуке)
2. Если освободить первый слот, тест проходит.
3. Если освободить второй слот, тест проходит.

Проблема только если заняты оба слота.

what is the test command ?

what is the test command ?

This command appear in BIOS router.
(Boot with using COM port)