Page 1 of 1
lost wireless port netmetal 5
Posted: Mon Oct 20, 2014 12:34 pm
by tarekomari
Netmetal 5,
I lost wireless port and after doing the upgarde to 6.20 /rb firmware 3.18.1 it still no wire less port
Re: lost wireless port netmetal 5
Posted: Mon Oct 20, 2014 1:55 pm
by CyberTod
Check if for some reason you did not switch to wireless package. The wireless module of Netmetal 5 requires the use of wireless-fp package.
Re: lost wireless port netmetal 5
Posted: Mon Oct 20, 2014 5:07 pm
by tarekomari
No wireless port at all, see photo???
Re: lost wireless port netmetal 5
Posted: Mon Oct 20, 2014 6:29 pm
by jvkassar
I had the same problem. Reset equipment. I went back to 6.19, climbed 6.20. And now wireless appears.
Is there any problem with NETmETAL. I have a link with rb912(NETBOX5) duplicate. With 921 on the same link, does not work well, even by setting N.
IN AC, the behavior is worse.
We are waiting for a stable version for Netmetal. We had several crashes. When you change the power, the radio turns off the ether port. Is working better with 6.19 in the firmware is 3.17.
Re: lost wireless port netmetal 5
Posted: Mon Oct 20, 2014 8:48 pm
by Lupin
Yes, there are many bugs.
For example on my netmetal (6.19) when I start a wireless snooper device crash
They need some fixes
Re: lost wireless port netmetal 5
Posted: Wed Oct 22, 2014 3:07 pm
by jvkassar
Installed RouterOS-mipsbe-6.21rc17.npk. AC remains broken. Lose interface. Reboot ethernet. IN N, does not crash when you change txpower or frequency. But compared the band in 6.19 or 6.20 dropped by half.
Re: lost wireless port netmetal 5
Posted: Sat Oct 25, 2014 8:44 am
by tarekomari
Check if for some reason you did not switch to wireless package. The wireless module of Netmetal 5 requires the use of wireless-fp package.
Re: lost wireless port netmetal 5
Posted: Sat Oct 25, 2014 7:19 pm
by Lupin
What's new in 6.21rc22 (2014-Oct-24 10:29):
*) wireless - fixed scanning tool crash for 802.11ac interfaces
*) wireless - fixed Nv2 kernel panic on 802.11ac interfaces
...
Re: lost wireless port netmetal 5
Posted: Thu Oct 30, 2014 9:34 am
by tarekomari
Thank you all, the problem solved by using wireless-fp pakage