Hello,

i have a problem with airplay not working.

The setup is wan ---> RB1100AHx2 (10.0.0.1) (here is the reciever xbmc, audioplayer) -(LAN)->(10.0.0.2) rb951g-2hnd (172.16.0.1)-(WIFI)> iphone and other clients

I have multicast enabled on both routers. On the iphone i can not see the xbmc or audioplayer as a airplay receivers but can connect to them with ip.

Interfaces need to be bridged.

Airplay works on broadcasts. Get things into one subnet and after a reboot of apple devices... they often start working.

I have all interfaces bridged on both modems but the thing still won't work.

All the devices need to be in the same network.
Are they all in the 172.16.0.0/24 network?

Ok, so this is the only solution?
No, some are in 10.0.0.0/24 and some are in 172.16.0.0/24.

This is how it works.

Ok. So what is the best practise to have both routers use the same subnet?

Run two dhcp servers, one on each of them? On the first let say (10.0.0.2-10.0.0.30) and on the other router (10.0.0.40-10.0.0.50)?
Or just run one dhcp server and then make a relay from the other one?

Use CapsMan and make the 951 an AP.

Tnx.

If it works... don't forget Karma