Page 1 of 1
Bricked RB1100 - Authentication Failure
Posted: Thu Oct 30, 2014 6:25 pm
by Joker757
I've bricked my RB1100. Netinstall won't recognize the unit. When I use the serial port and reboot I get Authentication Failure and that's as far as I can go. Any suggestions? Thanks.
Re: Bricked RB1100 - Authentication Failure
Posted: Thu Oct 30, 2014 6:30 pm
by uldis
Try to boot/power on the device by holding/pushing the reset button to load the secondary BIOS.
Re: Bricked RB1100 - Authentication Failure
Posted: Thu Oct 30, 2014 7:54 pm
by Joker757
Try to boot/power on the device by holding/pushing the reset button to load the secondary BIOS.
I did that but it didn't work
Re: Bricked RB1100 - Authentication Failure
Posted: Fri Oct 31, 2014 2:18 pm
by dbdom
Try "administrator" with empty password. Few months ago I had problem with system USB flash (MT for x86 version) and it helped. I think that when MT can't get access to pass file (like Linux Shadow) it "switches" to default empty password