Cisco 2960 Switch With Mikrotik CCR Router
Posted: Tue Dec 30, 2014 10:05 am
Hi,
We have two Cisco 2960 switch without any configuration , the acting just like a simple switch ! clients with different subnets connected to these switches , each switch connected to a mikrotik CCR 1016 router for firewalling , access control , routing and etc ...
problem is if one client from 192.168.1.0/24 network want to access to 192.168.2.0/24 network , packets do not going through my CCR Router , so no firewalling or Bandwidth controling could apply , besides client could change ip address or add an ip address and bypass my router.
could anyone help me with this scenario ?
Thank You
We have two Cisco 2960 switch without any configuration , the acting just like a simple switch ! clients with different subnets connected to these switches , each switch connected to a mikrotik CCR 1016 router for firewalling , access control , routing and etc ...
problem is if one client from 192.168.1.0/24 network want to access to 192.168.2.0/24 network , packets do not going through my CCR Router , so no firewalling or Bandwidth controling could apply , besides client could change ip address or add an ip address and bypass my router.
could anyone help me with this scenario ?
Thank You