IP: 10.10.10.5
Mask: 255.255.255.0
PC2:
IP: 192.168.1.10
Mask:255.255.255.0
PC1 and PC2 are on separate networks.
is it possible to to configure mikrotik router(RB2011UiAS-IN) so that PC1 would see PC2 as 10.10.10.6?
Router configuration:
Code: Select all
/ip address
add address = 10.10.10.1/24 interface = ether2 network = 10.10.10.0
add address = 192.0.168.1/24 interface = ether3 network = 192.168.1.0
/ip firewall nat
add action=dst-nat chain=dstnat dst-address=10.10.10.6 to-addresses=192.168.1.10
add action=src-nat chain=srcnat src-address=192.168.1.10 to-addresses=10.10.10.6
