Community discussions

MikroTik App
 
lpt2007
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 84
Joined: Wed Jul 23, 2014 4:08 pm

IP Tunnel problem

Sun Feb 08, 2015 10:13 am

I have two mikrotik cloud router switch conected together on port 1 and I wanna make IP Tunnel between them.

I followed this link instructions:
http://wiki.mikrotik.com/wiki/Manual:Interface/IPIP

but not not working. The router can't ping each other like in instructions. I get an error "HOST UNRICHABLE" when I try ping from crs1 to crs2?

Please help

thx in advance
 
lpt2007
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 84
Joined: Wed Jul 23, 2014 4:08 pm

Re: IP Tunnel problem

Tue Feb 10, 2015 8:13 am

I try EoIP with this instructions:
https://www.mikrotik.com/testdocs/ros/2 ... e/eoip.php

Also not working!!!

Any suggestion?
 
User avatar
ShayanFiroozi
Member Candidate
Member Candidate
Posts: 281
Joined: Sat Jun 01, 2013 12:44 pm
Location: Bandar Abbas , Iran

Re: IP Tunnel problem

Tue Feb 10, 2015 11:59 am

hi
why you wanna make IPIP or Eoip tunnel between them ?? tunneling may reduce your router performance
connect 2 routers together with cable and set a private ip on router1 and set a private ip address on the same range on other side
dynamic route will automatically created.
 
lpt2007
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 84
Joined: Wed Jul 23, 2014 4:08 pm

Re: IP Tunnel problem

Tue Feb 10, 2015 2:44 pm

hi
why you wanna make IPIP or Eoip tunnel between them ?? tunneling may reduce your router performance
connect 2 routers together with cable and set a private ip on router1 and set a private ip address on the same range on other side
dynamic route will automatically created.
I wanna have two separate networks with own gateway and dhcp server and I wanna setup like this that user from firm computer see whole network (192.168.0.0/24 and 192.168.200.0./24) and the users on home network can only see home network (only 192.168.0.0/24).

I have one at home CRS125-24G-1S-2HnD and at one firm CRS125-24G-1S connected together with network kabel 1Gbps. The CRS125-24G-1S-2HnD is conected to modem (INTERNET) and I wana separete this two routers.

MODEM: 192.168.1.1
|
CRS125-24G-1S-2HnD
IP: 192.168.0.254/24
GATEWAY: 192.168.0.254
DHCP RANGE: 192.168.0.50-192.168.0.99
|
|
CRS125-24G-1S
IP: 192.168.200.254/24
DHCP RANGE: 192.168.200.50-192.168.200.99

Please help me setup network like this.

thx in advance
 
User avatar
ShayanFiroozi
Member Candidate
Member Candidate
Posts: 281
Joined: Sat Jun 01, 2013 12:44 pm
Location: Bandar Abbas , Iran

Re: IP Tunnel problem

Thu Feb 12, 2015 3:43 pm

would you please send your network diagram ?

Who is online

Users browsing this forum: jfuu and 30 guests