Page 1 of 1

ccr1009-8g-1s-1s+ max microSD card

Posted: Tue Mar 10, 2015 5:08 pm
by Rzewus
Hello there.
I bought Sandisks EXTREME MicroSDXC UHS-I C10 U3 64GB
but it does not even show on the interface.
is there some kind of a "supported SD's" list?

Re: ccr1009-8g-1s-1s+ max microSD card

Posted: Wed Mar 11, 2015 10:54 am
by sergejs
Access your router by Winbox, open System ---> Disk.
Do you see microSD disk there?

Re: ccr1009-8g-1s-1s+ max microSD card

Posted: Wed Mar 11, 2015 11:28 am
by Rzewus
that's what i ment by "its not visible in interface" :)
i can't see any sign of it.

Re: ccr1009-8g-1s-1s+ max microSD card

Posted: Wed Mar 11, 2015 3:16 pm
by ivan07
that's what i ment by "its not visible in interface" :)
i can't see any sign of it.
Seems to be CCR supports only 32 and bellow microsd...I also was not able to use 64gb microsd.

Re: ccr1009-8g-1s-1s+ max microSD card

Posted: Mon Mar 16, 2015 12:59 pm
by Rzewus
Today I was finally able to see this router with my own eyes ( and hands )
we tried to insert 4GB memory card - no result ...
but wen i inserted 32 GB ... it suddenly apeared, tried to replace it again with 64GB - no result ... back to 32GB - silence... nothing... tried to get 0.5 mm of th card out to see if it connects - nothing...
could it be hardware failure ?
Tonight ill try to reboot the router with SD in it.

Re: ccr1009-8g-1s-1s+ max microSD card

Posted: Tue Mar 17, 2015 1:14 am
by Rzewus
After a reboot ... 32GB card is accesable.
tomorrow I will try again with the 64GB

Re: ccr1009-8g-1s-1s+ max microSD card

Posted: Tue Mar 17, 2015 8:58 am
by Rzewus
Accessable ... but not usable :/
I can't format it properly ... formating to FAT32 resulted in rubbish in catalogue DISK2 in FILES menu.
after that i tried to format it to ext3 .... aaand the card is gone again. Reboot does not help.

Re: ccr1009-8g-1s-1s+ max microSD card

Posted: Wed Mar 18, 2015 6:09 pm
by Rzewus
can someone at least show me direction where to look for the cause of such behaviour ?

Re: ccr1009-8g-1s-1s+ max microSD card

Posted: Tue Mar 31, 2015 10:09 am
by Rzewus
OK. Case is resolved.
64GB is normally supported, BUT there is no HOTPLUGG feature, so i had to:
insert the card
reboot the router
format the card
reboot the router
and then - the card was fully accesable.

Re: ccr1009-8g-1s-1s+ max microSD card

Posted: Tue May 26, 2015 5:22 pm
by hailnora
Hello! Please tell which RouterOS version do you use on CCR?
I face the same issue with microSD card 16Gb. When my filesize reaches 390-400Mb, the read/write speed extremely falls down to zero.