Page 1 of 1
How to install OS on RB 532
Posted: Fri Jul 07, 2006 6:39 pm
by oggyB
Hi,
Im new here, so i dont know mush about this. I have RB 532, with no OS on it. I connected it with PC (rs232) and acssesed to his BIOS. What should I do next, im not so good at networking so plz describe me step by step...
THANKS
Posted: Fri Jul 07, 2006 7:22 pm
by sergejs
MikroTik RouterOS is preinstalled on RouterBOARD. probably you have RouterOS.
MAC-Winbox
MAC-Winbox helps you to access the RouterOS.
To (re)install MikroTik RouterOS use
netinstall.
Posted: Fri Jul 07, 2006 7:22 pm
by ICEASYCOM
there are some steps in polish language:
http://download.support.technologic.pl/ ... %20500.pdf
maybe the screenshots will be helpfully for you
Posted: Mon Jul 10, 2006 7:41 am
by normis
we have a manual in english too ...
http://www.mikrotik.com/docs/ros/2.9/guide/netinstall
... but as suggested, RB500 already comes with an OS
Posted: Mon Jul 10, 2006 5:11 pm
by oggyB
there was OS on the board but someone has formated its NAND, thanks ill try with those pages, THANKS
Posted: Mon Jul 10, 2006 7:42 pm
by oggyB
I tried everything it just keeps displaying, ive downloader latest netinstall
RouterBOOT booter 1.11
RouterBoard 532
CPU frequency: 264 MHz
Memory size: 32 MB
Press any key within 1 seconds to enter setup.
kernel not found
trying bootp protocol..........................................................
please help
Posted: Mon Jul 10, 2006 9:52 pm
by cmit
Make sure that
- the PC netinstall is running on and your router are on the same layer 2 network
- netinstall has the "boot from net" option enabled (can't remember it's real name right now...)
- the RB is configured to boot from LAN (first)
I've had some strange problems sometimes with a switch between the netinstall PC and the router. If nothing works, try a direct (cross-over) cable between router and PC.
Best regards,
Christian Meis
RB532+502
Posted: Mon Oct 16, 2006 7:44 pm
by sofia.marques
Every router comes with the OS instaled?
What is the licence? Level 4?
Posted: Tue Oct 17, 2006 8:31 am
by sergejs
RouterBOARD comes with instaled RouterOS, default license level 4.
Posted: Fri Oct 20, 2006 1:24 pm
by mezlo
My RB532 came with license level 5 preinstalled from WISP. I've had it about 6 months or so.
Posted: Fri Oct 20, 2006 1:29 pm
by normis
apparently you paid for it
Posted: Fri Oct 20, 2006 2:03 pm
by balimore
My RB532 came with license level 5 preinstalled from WISP. I've had it about 6 months or so.
------
Thanks all and MT team,
Last year ago, i bought unwires package and they had good solution as our request.... and until now work fine... it came with 4 and 5 level....
again, Thanks Mikrotik. from it we has nice sleeeeeeep!!!
and i love you...
regards
Hasbullah.com
------
Posted: Fri Oct 20, 2006 5:14 pm
by mezlo
apparently you paid for it
Probably. I work for an ISP and got the router from them so I'm sure they ordered it with level 5.
Mez