Page 1 of 1
Mikrotik 951G-2HnD and Samsung TV problem
Posted: Wed Jun 17, 2015 11:15 pm
by harms
I have problem to connect Samsung TV 65JS8502 to internet through a wired connection. It didn’t receive IP config from DHCP and it also don’t working through manual IP configuration. Through Mikrotik 951G-2HnD wireless connection is all ok and my TV see Internet without problem.
If I connect TV directly to Internet provider modem it receive IP configuration successfully. My other home devices PC, Synology DiskStation and Popcorn player don’t have any issues connecting to the internet through 951G-2HnD and wired connection.
Any ideas?
P.S. Samsung TV and Mikrotik have latest firmware’s
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon Jun 29, 2015 3:02 pm
by harms
Situation update.
1.Physically Ethernet interfere status is running 100MB/s full duplex (TV have only 100MB/s port).I trying turn off autonegotiation and set speed to 100MB/s, port status running, but still no Internet.
2.I’m trying connect my TV to the internet through my old Linksys WMP400N router. Successfully, without any issues through wire and wireless.
3.I’m reconfigure old router as network switch and made chain device -> Linksys -> Mikrotik -> Lattelekom optic. All devices (PC, Popcorn, NAS) connecting to the internet without any issues, but TV not
4.I enable DHCP debugging. This is log(FC:8F:90:22:55:44 – TV wifi, FC:8F:90:CD:55:59 – TV LAN) :
Jun/26/2015 23:26:20 radvd,debug dhcp: skip Router Advertisement sending on bridge-local: no prefixes to send
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: default received discover with id 2568666165 from 0.0.0.0
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: secs = 4
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: ciaddr = 0.0.0.0
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: chaddr = FC:8F:90:CD:55:59
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Msg-Type = discover
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Class-Id = "udhcpc1.21.1"
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Max-DHCP-Message-Size = 576
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Parameter-List = Auto-Proxy-Config,Router,NTP-Server,Domain-Name,Domain-Server,Subnet-Mask,Host-Name
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Client-Id = 01-FC-8F-90-CD-C5-59
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Host-Name = "localhost"
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: default sending offer with id 2568666165 to 255.255.255.255
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: ciaddr = 0.0.0.0
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: yiaddr = 192.168.1.6
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: siaddr = 192.168.1.1
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: chaddr = FC:8F:90:CD:55:59
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Msg-Type = offer
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Server-Id = 192.168.1.1
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Address-Time = 259200
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Router = 192.168.1.1
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: NTP-Server = 92.240.65.179,92.240.65.179
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Domain-Server = 192.168.1.1
Jun/26/2015 23:26:21 dhcp,debug,packet dhcp: Subnet-Mask = 255.255.255.0
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: default received discover with id 2568666165 from 0.0.0.0
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: secs = 6
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: flags = broadcast
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: ciaddr = 0.0.0.0
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: chaddr = FC:8F:90:CD:55:59
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Msg-Type = discover
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Class-Id = "udhcpc1.21.1"
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Max-DHCP-Message-Size = 576
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Parameter-List = Auto-Proxy-Config,Router,NTP-Server,Domain-Name,Domain-Server,Subnet-Mask,Host-Name
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Client-Id = 01-FC-8F-90-CD-C5-59
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Host-Name = "localhost"
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: default sending offer with id 2568666165 to 255.255.255.255
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: flags = broadcast
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: ciaddr = 0.0.0.0
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: yiaddr = 192.168.1.6
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: siaddr = 192.168.1.1
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: chaddr = FC:8F:90:CD:55:59
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Msg-Type = offer
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Server-Id = 192.168.1.1
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Address-Time = 259200
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Router = 192.168.1.1
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: NTP-Server = 92.240.65.179,92.240.65.179
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Domain-Server = 192.168.1.1
Jun/26/2015 23:26:23 dhcp,debug,packet dhcp: Subnet-Mask = 255.255.255.0
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: send ether1-gateway -> ff02::1:2%4
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: type: solicit
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: transaction-id: c6c9a3
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: -> clientid: 00030001 d4ca6d19 2572
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: -> oro: 23
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: -> elapsed_time: 62
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: -> ia_pd:
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: t1: 1800
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: t2: 2880
Jun/26/2015 23:26:24 dhcp,debug,packet dhcp: id: 0x1
Jun/26/2015 23:26:48 wireless,debug dhcp: wlan1: FC:8F:90:22:55:44 attempts to associate
Jun/26/2015 23:26:48 wireless,debug dhcp: wlan1: FC:8F:90:22:55:44 in local ACL, accept
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: default received request with id 1161066267 from 0.0.0.0
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: ciaddr = 0.0.0.0
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: chaddr = FC:8F:90:22:55:44
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Msg-Type = request
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Class-Id = "udhcpc1.21.1"
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Address-Request = 192.168.1.12
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Parameter-List = Auto-Proxy-Config,Router,NTP-Server,Domain-Name,Domain-Server,Subnet-Mask,Host-Name
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Client-Id = 01-FC-8F-90-22-5F-44
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Host-Name = "localhost"
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: default sending ack with id 1161066267 to 255.255.255.255
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: ciaddr = 0.0.0.0
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: yiaddr = 192.168.1.12
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: siaddr = 192.168.1.1
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: chaddr = FC:8F:90:22:55:44
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Msg-Type = ack
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Server-Id = 192.168.1.1
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Address-Time = 259200
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Router = 192.168.1.1
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: NTP-Server = 92.240.65.179,92.240.65.179
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Domain-Server = 192.168.1.1
Jun/26/2015 23:26:48 dhcp,debug,packet dhcp: Subnet-Mask = 255.255.255.0
Jun/26/2015 23:26:49 radvd,debug dhcp: received Router Solicitation on interface=bridge-local
Jun/26/2015 23:26:49 radvd,debug dhcp: skip Router Advertisement sending on bridge-local: no prefixes to send
Jun/26/2015 23:26:49 radvd,debug dhcp: received Router Solicitation on interface=bridge-local
Jun/26/2015 23:26:49 radvd,debug dhcp: skip Router Advertisement sending on bridge-local: no prefixes to send
Jun/26/2015 23:26:50 radvd,debug dhcp: received Router Solicitation on interface=bridge-local
Jun/26/2015 23:26:50 radvd,debug dhcp: skip Router Advertisement sending on bridge-local: no prefixes to send
Jun/26/2015 23:26:53 radvd,debug dhcp: received Router Solicitation on interface=bridge-local
Jun/26/2015 23:26:53 radvd,debug dhcp: skip Router Advertisement sending on bridge-local: no prefixes to send
Jun/26/2015 23:26:55 radvd,debug dhcp: skip Router Advertisement sending on ether1-gateway: no prefixes to send
Jun/26/2015 23:26:57 radvd,debug dhcp: received Router Solicitation on interface=bridge-local
Jun/26/2015 23:26:57 radvd,debug dhcp: skip Router Advertisement sending on bridge-local: no prefixes to send
Jun/26/2015 23:27:10 route,debug,event dhcp: Interface change
Jun/26/2015 23:27:10 route,debug,event dhcp: interface=ether4-slave-local
Jun/26/2015 23:27:10 route,debug,event dhcp: status=UP
Jun/26/2015 23:27:10 route,debug,event dhcp: mtu=1500
Jun/26/2015 23:27:10 route,debug,calc dhcp: Begin calculation
Jun/26/2015 23:27:10 route,debug,event dhcp: Link down
Jun/26/2015 23:27:10 route,debug,event dhcp: interface=ether4-slave-local
Jun/26/2015 23:27:10 route,debug,event dhcp: Update
Jun/26/2015 23:27:10 route,debug,event dhcp: interface=ether4-slave-local
5. Then I manually configure IP address for TV LAN (192.168.1.6) it show what he have connection to LAN but not to the internet. I run Packet sniffer on Mikrotik for 192.168.1.6 IP and after analyze result with Wireshark. I see huge amount of errors TCP Retransmission to and from cache.google.com servers:
467 110.755798 87.246.148.45 195.122.30.35 TCP 74 [TCP Spurious Retransmission] 45277→443 [SYN] Seq=0 Win=14600 Len=0 MSS=1460 SACK_PERM=1 TSval=6993028 TSecr=0 WS=128
468 110.759502 195.122.30.35 87.246.148.45 TCP 74 [TCP Retransmission] 443→45277 [SYN, ACK] Seq=0 Ack=1 Win=28960 Len=0 MSS=1460 SACK_PERM=1 TSval=1910153821 TSecr=6991276 WS=128
469 110.759626 195.122.30.35 192.168.1.6 TCP 74 [TCP Retransmission] 443→45277 [SYN, ACK] Seq=0 Ack=1 Win=28960 Len=0 MSS=1460 SACK_PERM=1 TSval=1910153821 TSecr=6991276 WS=128
470 110.759644 195.122.30.35 192.168.1.6 TCP 74 [TCP Retransmission] 443→45277 [SYN, ACK] Seq=0 Ack=1 Win=28960 Len=0 MSS=1460 SACK_PERM=1 TSval=1910153821 TSecr=6991276 WS=128
471 110.787723 192.168.1.6 195.122.30.35 TCP 74 [TCP Spurious Retransmission] 45279→443 [SYN] Seq=0 Win=14600 Len=0 MSS=1460 SACK_PERM=1 TSval=6993036 TSecr=0 WS=128
472 110.787744 192.168.1.6 195.122.30.35 TCP 74 [TCP Spurious Retransmission] 45279→443 [SYN] Seq=0 Win=14600 Len=0 MSS=1460 SACK_PERM=1 TSval=6993036 TSecr=0 WS=128
473 110.787807 87.246.148.45 195.122.30.35 TCP 74 [TCP Spurious Retransmission] 45279→443 [SYN] Seq=0 Win=14600 Len=0 MSS=1460 SACK_PERM=1 TSval=6993036 TSecr=0 WS=128
87.246.148.45 – my external IP
192.168.1.6 – manually configured IP,LAN
195.122.30.X – cache.google.com
P.S. Downgrade packages to 6.28, same situation
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Tue Jun 30, 2015 2:03 pm
by ebreyit
Can you export your router config and post it here. it will make it easier to see what's going on.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Tue Jun 30, 2015 4:05 pm
by harms
Can you export your router config and post it here. it will make it easier to see what's going on.
# jun/30/2015 15:41:34 by RouterOS 6.28
# software id = VWU5-9RJL
#
/interface bridge
add admin-mac=D4:CA:6D:19:XX:73 auto-mac=no mtu=1500 name=bridge-local
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-onlyn channel-width=\
20/40mhz-ht-below country=latvia disabled=no distance=indoors frequency=\
auto l2mtu=2290 mode=ap-bridge ssid=norka wireless-protocol=802.11
/interface ethernet
set [ find default-name=ether1 ] name=ether1-gateway
set [ find default-name=ether2 ] name=ether2-master-local
set [ find default-name=ether3 ] master-port=ether2-master-local name=\
ether3-slave-local
set [ find default-name=ether4 ] master-port=ether2-master-local name=\
ether4-slave-local rx-flow-control=auto tx-flow-control=auto
set [ find default-name=ether5 ] master-port=ether2-master-local name=\
ether5-slave-local
/ip neighbor discovery
set ether1-gateway discover=no
set ether2-master-local discover=no
set ether3-slave-local discover=no
set ether4-slave-local discover=no
set ether5-slave-local discover=no
set bridge-local discover=no
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=\
dynamic-keys supplicant-identity=MikroTik wpa-pre-shared-key=xxxxxx \
wpa2-pre-shared-key=xxxxxxxx
add authentication-types=wpa-psk,wpa2-psk eap-methods="" mode=dynamic-keys \
name=profile supplicant-identity=MikroTik wpa-pre-shared-key=yyyyyyyyyy \
wpa2-pre-shared-key=yyyyyyyyyy
/interface wireless
add default-client-tx-limit=10000000 disabled=no l2mtu=2290 mac-address=\
D6:CA:6D:19:XX:77 master-interface=wlan1 name=wlan2 security-profile=\
profile ssid=norka-draugiem
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=3des
/ip pool
add name=dhcp ranges=192.168.1.2-192.168.1.254
/ip dhcp-server
add address-pool=dhcp always-broadcast=yes disabled=no interface=bridge-local \
lease-time=3d name=default
/system logging action
set 0 memory-lines=100
set 1 disk-lines-per-file=100
add bsd-syslog=yes name=remalert remote=192.168.1.2 syslog-severity=alert \
target=remote
add bsd-syslog=yes name=reminfo remote=192.168.1.2 syslog-severity=info \
target=remote
add bsd-syslog=yes name=remwarning remote=192.168.1.2 syslog-severity=warning \
target=remote
add bsd-syslog=yes name=reminfoa remote=xxx.xxx.xxx.xxx remote-port=50000 \
syslog-severity=info target=remote
add bsd-syslog=yes name=remalerta remote=xxx.xxx.xxx.xxx remote-port=50000 \
syslog-severity=alert target=remote
add bsd-syslog=yes name=remwarninga remote=xxx.xxx.xxx.xxx remote-port=50000 \
syslog-severity=warning target=remote
/interface bridge filter
# in/out-bridge-port matcher not possible when interface (ether1-gateway) is not slave
add action=drop chain=forward in-interface=ether1-gateway
# in/out-bridge-port matcher not possible when interface (ether1-gateway) is not slave
add action=drop chain=forward out-interface=ether1-gateway
add action=drop chain=forward in-interface=wlan2
add action=drop chain=forward out-interface=wlan2
/interface bridge port
add bridge=bridge-local interface=ether2-master-local
add bridge=bridge-local interface=wlan1
add bridge=bridge-local interface=wlan2
/interface wireless access-list
add interface=wlan1
add ap-tx-limit=20000000 client-tx-limit=20000000 interface=wlan2
/ip address
add address=192.168.1.1/24 comment="default configuration" interface=\
ether2-master-local network=192.168.1.0
/ip cloud
set ddns-enabled=yes
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1-gateway
/ip dhcp-server lease
add address=192.168.1.2 always-broadcast=yes mac-address=00:11:32:07:xx:6A \
server=default
add address=192.168.1.3 client-id=1:0:6:dc:43:xx:ae mac-address=\
00:06:DC:43:xx:AE server=default
add address=192.168.1.4 client-id=1:30:cd:a7:1d:xx:ba mac-address=\
30:CD:A7:1D:xx:BA server=default
add address=192.168.1.14 client-id=1:74:75:48:41:xx:a7 comment=kindle \
mac-address=74:75:48:41:xx:A7 server=default
/ip dhcp-server network
add address=192.168.1.0/24 comment="default configuration" dns-server=\
192.168.1.1 gateway=192.168.1.1 netmask=24
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.1.1 name=norka-router
/ip firewall filter
add chain=input comment="Winbox from xxx" dst-port=8291 protocol=tcp \
src-address=xxx.xxx.xxx.xxx
add chain=input comment="Winbox from xxx" dst-port=8291 protocol=tcp \
src-address=xxx.xxx.xxx.xxx
add chain=forward comment="default configuration" connection-state=\
established
add chain=input comment="default configuration" connection-state=established
add chain=forward comment="default configuration" connection-state=related
add chain=input comment="default configuration" connection-state=related
add chain=input comment="default configuration" protocol=icmp
add action=drop chain=input comment="default configuration" in-interface=\
ether1-gateway
add action=drop chain=forward comment="default configuration" \
connection-state=invalid in-interface=ether1-gateway
add action=drop chain=input comment="Drop invalid connections" \
connection-state=invalid in-interface=ether1-gateway
/ip firewall nat
add action=masquerade chain=srcnat comment="default configuration" \
out-interface=ether1-gateway to-addresses=0.0.0.0
add action=dst-nat chain=dstnat dst-port=5001 in-interface=ether1-gateway \
protocol=tcp src-address=xxxx.xxx.xxx.xxx to-addresses=192.168.1.2 \
to-ports=5001
add action=dst-nat chain=dstnat dst-port=9091 in-interface=ether1-gateway \
protocol=tcp src-address=xxxx.xxx.xxx.xxx to-addresses=192.168.1.2 \
to-ports=9091
add action=dst-nat chain=dstnat dst-port=5001 in-interface=ether1-gateway \
protocol=tcp src-address=xxx.xxx.xxx.xxx to-addresses=192.168.1.2 \
to-ports=5001
/ip ipsec policy
set 0 dst-address=0.0.0.0/0 src-address=0.0.0.0/0
/ip proxy
set cache-path=web-proxy1
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/ip traffic-flow
set enabled=yes interfaces=ether2-master-local
/ip traffic-flow target
add address=192.168.1.15:9996 version=9
/ip upnp
set show-dummy-rule=no
/ip upnp interfaces
add interface=bridge-local type=internal
add interface=ether1-gateway type=external
/ppp secret
add disabled=yes local-address=192.168.xx.xx name=ppp1 password=xxxxx \
profile=default-encryption remote-address=192.168.xx.xx service=pptp
/romon port
add disabled=no
/snmp
set enabled=yes
/system clock
set time-zone-autodetect=no time-zone-name=Europe/Riga
/system identity
set name=norka-router
/system leds
set 0 interface=wlan1
/system logging
add action=reminfo topics=info
add action=remalert topics=critical,error
add action=remwarning topics=warning
add action=reminfoa topics=info
add action=remalerta topics=critical,error
add action=remwarninga topics=warning
add action=disk disabled=yes prefix=dhcp topics=debug
/system ntp client
set enabled=yes primary-ntp=92.240.65.179 secondary-ntp=92.240.65.179 \
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=ether2-master-local
add interface=wlan1
add interface=wlan2
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=ether2-master-local
add interface=wlan1
add interface=wlan2
/tool sniffer
set file-limit=10000KiB file-name=samsung_lan7.trace filter-interface=\
ether5-slave-local
P.S. Also i'm trying reset router and TV configurations to default with same result
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Wed Jul 01, 2015 2:45 am
by chechito
try disabling bridge filtering rules
assign lan ip address from ether 2 to bridge local interface
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Wed Jul 01, 2015 9:30 am
by harms
try disabling bridge filtering rules
assign lan ip address from ether 2 to bridge local interface
I already trying this settings but separately. After changing LAN ip to bridge-local interface also doing router restart, but bridge filter rules disabling without restart. Today I will try both settings simultaneously with router restart.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Wed Jul 01, 2015 9:18 pm
by harms
1. I trying recommended settings with restart – same problem
2. I take from my IT security guys another model Mikrotik router RouterBOARD 450G (without Wifi , LAN 100Mb/s) with same packages (6.29.1) and firmware (3.22) versions. With it (default setting) my Samsung TV work perfectly, without any issues.
3. I think problem is incompatibility between Mikrotik 951G-2HnD and Samsung 65JS8502 hardware or firmware
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Wed Jul 08, 2015 9:52 am
by harms
Situation update
I take from my IT guys another Mikrotik 951G-2HnD unit and test it with default configuration and it’s WORKING …. Mystic … my router with same configuration, firmware and packages DON’T WORKING …
LOOK like hardware problem
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Fri Jul 17, 2015 3:07 pm
by purana
Situation update
I take from my IT guys another Mikrotik 951G-2HnD unit and test it with default configuration and it’s WORKING …. Mystic … my router with same configuration, firmware and packages DON’T WORKING …
LOOK like hardware problem
Good to know. I have that unit coming via post and already have a samsung tv too
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sun Sep 27, 2015 2:08 pm
by marsik
Hi all,
I have exact the same problem with 951G-2HnD but Samsung 6 series TV UE48J6300AU.
I see that dhcp server leases an IP address for a 20-30 seconds but TV doesn't use it. Sometimes router writes log message 'dhcp1 offering lease 192.168.88.245 for FC:8F:90:75:DA:14 without success'. All my other home devices work fine and use dhcp. I even can connect my laptop to the same cable and it gets IP address with no problem. I use the latest firmware on router and TV.
Has anyone found the solution? Please, help.
TIA,
Edward
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon Sep 28, 2015 9:32 pm
by marsik
UPD: when I connect cable to my laptop, both ends report connection as 1Gbit/s. When I reconnect the cable to my TV, router detectes interface rate as 100Mbit/s but neither DHCP or static IP settings work on TV. It seems Samsung, can't use IP address for some reasons. The only way that works so far for me as a temporary workaround is to decrease speed on router's port down to 10Mbit/s. That way connection is stable with dhcp/static settings.
I think the problem in TV's network adapter or its firmware.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sun Oct 04, 2015 12:11 pm
by marsik
Hi
Eventually I solved the problem by connecting switch between router and TV ports. Now TV detects network and gets a dynamic IP with no problem. What do you think could be the reason that TV doesn work directly via router port? Samsung Service tested TV and didn't find any problem with connection to their Cisco at test lab. The distance between router and TV is only about 5-6 meters.
Thanks
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sun Oct 04, 2015 12:31 pm
by ebreyit
Sounds very similar to the issue mikrotik devices had with the UK's openreach FTTC modems.
Not sure if it was a hardware or firmware fix from mikrotik to fix in the end though.
Might be worth inquiring.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sun Nov 08, 2015 10:57 am
by yangwao
Hello, I'm having the same problem. I tried to downgrade to 10M on router, tv gets normal (3d) lease, but on tv after that says invalid MAC address and I can't even set manual IP. When I put switch (dlink) between router and tv, it's same error, but now with 100M link on router.
I can get normal lease through that same cable on my pc. Also when I connect tv via cable through my pc to network, it get's normal lease and it works.
Does this get us closer to problem?
Mikrotik 951G-2HnD 6.33rc37 (tried also with stable one)
Samsung UE55JU6652UXXH SW version: 1411
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Tue Dec 08, 2015 6:09 am
by Ozik
Hi all,
have exactly the same problem. Can't connect TV via Ethernet. Wi-Fi is ok, but need Ethernet.
TV UE55JU6500
RB951G-2HnD v6.33.3
Do we have any support team there?
Thnx
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sun Jul 03, 2016 8:50 pm
by neomega702
Hello, everyone!
I have a similar problem. My tv (Samsung J5300) gets ip address but every 20 minutes "tv freezes" and shows a alert "network issue". It's lost connection just for a few seconds, and everything works ok for another 20 minutes.
I tried a lot of things and what i discovered is that the tv doesn't work on bridge interfaces.
So, my solution:
1 - Remove "master port" on ethernet port 2" (in my case),
2- Configure a new network on that interface
3 - Enable dhcp
4 - Enjoy.
Does any one know why?
My only "problem" is that "cast youtube" not works, so i can't cast youtube videos from my mobile to the tv.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sun Apr 30, 2017 11:50 pm
by Bybnila
So, is there an any solution except installing switch between TV and Mikrotik?
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon May 01, 2017 1:47 pm
by pukkita
@ Marsik & neomega702:
Try either setting DHCP server authoritative = always, or install 6.39.
@ yangwao: please post a config export
@ Ozik: this is a user-supported forum, mikrotik staff are around but if you want direct support, you should email them, including a supout. To be able to guide you in the right direction here, you should post more information (configuration export).
LOOK like hardware problem
Yes. Have you tried to netinstall it? If the problem persist, generate a suppout and email support.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Wed May 03, 2017 4:48 pm
by p3rad0x
I have the solution to your problems.
Get an apple TV.
The amount of times I have received support calls when smart tv's don't want to connect to the internet is far too much
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon Jul 31, 2017 6:33 pm
by Bybnila
Well, I solved my problem with TV. I've bought Mikrotik mAP 2N and connected my TV trough it.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sat Feb 17, 2018 1:06 am
by subseven
I also have a 951G-2HnD (Firmware 6.41.2 / packages 6.41.2)
WLAN ist working from start but by wired connection my Samsung Serie 6 TV is not able to get an IP from the DHCP Server.
Samsung TV has latest updates. I also made a full router reset with default configuration.
Is the problem solved or is there a fix?
Thank you!
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sat Feb 17, 2018 10:13 am
by Pea
I had seldom this problem with Samsung TV and Samsung BD player, not getting IP from DHCP.
Only disconecting the Samsung device from power a connecting after a while fixed the problem. It must be some problem or incompatibility at Samsung side.
I finaly fixed it by switching both devices to Sony brand...
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon Feb 19, 2018 5:27 am
by thiagohfl
Someone tried to connect tv into a port out of the Bridge on RB951G???
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Wed May 09, 2018 5:11 am
by MKabar
Still not working even with latest RouterOS 6.42.1 and Samsung UE55MU6172 and 951G-2HnD. Common, fix it please! Thank you.
Through some switch it´s working OK, but I need direct connection through LAN to my 951G-2HnD.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sat Nov 24, 2018 8:58 pm
by mrj45
I Surprised - I'm not alone here. Mikrotik 951G-2HnD v.6.43.2 also wired network not working to my LG smart-TV. I think something with DNS. If I plug cable directly to my TV - works fine, but not from my router. LG and Samsung customer support adviced to change DNS to 8.8.8.8 It was helpful for many but not in my case. I plan to buy a new Mikrotik model I will give feedback when I get it.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sun Nov 25, 2018 11:23 am
by Ozik
@pukkita: Thnx for reply. Actually this issue is not actual for now. I've bought Android Shield TV with 1GB. Actually, I think embedded smart TV is ... bad. So, Android TV box is must have. And also I bought new mikrotik hap ac2.
I Surprised - I'm not alone here. Mikrotik 951G-2HnD v.6.43.2 also wired network not working to my LG smart-TV. I think something with DNS. If I plug cable directly to my TV - works fine, but not from my router. LG and Samsung customer support adviced to change DNS to 8.8.8.8 It was helpful for many but not in my case. I plan to buy a new Mikrotik model I will give feedback when I get it.
@mrj45, I don't think that issue is in DNS. The most likely this is hardware issue. As was advised, it's better to ask support directly (and share here the answer
). But anyway, I advise you to buy separate Android TV box. This is to long to explain here, but believe it is worth.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Thu Dec 13, 2018 10:52 pm
by stal1n
Hi folks,
I have the same issue with Mikrotik 951G-2HnD and Samsung UE55NU7120.
I have been trying everything and nothing helps.
Will be keeping eye on this thread. Good luck
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Fri Dec 14, 2018 6:34 pm
by chechito
some weeks ago i had an issue connecting a samsung smart tv to rb951G using ethernet cable.
the issue was on tv i think, because connecting the tv to ISP ONU dont work either, after testing with many switches of different vendors some unbranded switch make it work, but with inferior performance than wireless connection.
wired connection on some tv is crap
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sat Dec 15, 2018 10:53 pm
by verisv
Same here. LG TV, Mikrotik rb751 and unable to get TV to either access DNS and if I get to DNS it wont access the internet. Any other router works OK.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Tue Jan 15, 2019 11:05 am
by mrj45
maybe someone are tested mikrotik: "hap ac2" wired connection to smart TV's? is it working well and has access to internet?
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon Jan 21, 2019 9:16 pm
by baxenko
I have this problem too
. Help me!
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Wed Oct 16, 2019 7:52 am
by otrub
Hi everyone!
I have the same problem with connection my Samsung Smart TV via ethernet. Wifi works fine, but ethernet does not work. DHCP failures, assigned address...deassiged address. I tried to change whatever options on bridge and ethernet ports I could, but no results.
My device RB2011UAS-2HnD
Feature of my RB is it have two switches onboard 1-5 ether and 6-10 ether. And solving of problem is to connect TV and Lan (on my way) for two different switches. And then join them into one bridge. I haven't the explaining why it works but it my solving.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon Dec 23, 2019 1:07 pm
by UserD
It's seems like hardware issue. Have RB951G-2HnD and that problem too.
I try to understand what happening inside TVBOX MXQ Pro 4k using ADB.
Android tv box just receive dhcp answer but cannot apply received config.
When using "dhcptool eth0" inside tvbox, address applied successfully. But, it need to send that command every time. That not resolve problem.
The solution is: Just use easy Ethernet 100M switch. (In my case is TP-Link SF-10008D)
And enjoyyy
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Fri Mar 20, 2020 8:55 am
by Oxtn
maybe someone are tested mikrotik: "hap ac2" wired connection to smart TV's? is it working well and has access to internet?
Had the same problem. RB750Gr3 and hAP lite TC (RB941-2nD-TC) does not work with Samsung UE55ES7500 using wired connection. Took a chance and bought HAP ac2 (RBD52G-5HacD2HnD-TC) - it works fine!
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Tue Sep 22, 2020 5:14 pm
by unique82
Hello, did anyone found solution to Mikrotik NAT-Samsung TV problem ?
here is ours :
MK type SXT LITE5 AC(6.44.3)
Samasung TV UE43RU7172UXXH runs Tizen OS
TV is just not taking DHCP address, from my point of view discover,offer,request,ack works fine as shown in attached prtscr when i debuged it, but TV stays on 0.0.0.0 and mikrotik assign and deassign the address imediately,
Setup: Mk as NAT -> ubnt wifi AP -> TV
technician did try straight cable connection as well with same result, all the other devices APPLE,Android phones etc.. works fine behind wifi AP but Samsung just wont.
We found two solutions:
1) just put another NAT device between Mk and TV
2) set IP in Samsung TV and make it static in Mk DHCPserver
Any ideas?
Did try changing Authoritative to yes - no change.
Also i attached DHCP setup , its standard Mk setup
Thx for any advices.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Thu Sep 24, 2020 4:55 pm
by WeWiNet
MK type SXT LITE5 AC(6.44.3)
First things first, upgrade your OS to something recent and not vulnerable...
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sun Jul 11, 2021 12:53 am
by onlineuser
A picture is worth a thousand words...
Bug.png
When I connect my RB2011 (tested with ROS 6.40.1 and ROS 6.47.10) to the white UPC (Magenta) Connect box (I use port 6 - 100 Mbit/sec) the RB2011 only connects with the speed of 10 Mbit/sec. If I force 100 Mbit/sec no link will be established (the cable test says that the second pair has sometimes a problem).
When I connect any other 100 Mbit device to port 6 of the RB2011, everything works fine. When I connect a laptop to the Connect box, I can even connect with 1000 Mbit/sec. So the port 6 is not defective.
Now I tried to put a 100 Mbit/sec switch between RB2011 and the UPC Connect box - now it works with 100 Mbit/sec without any link downs. The problem is solved.
So, my RB2011 has no hardware failure, it must be a software bug that the two devices can't work together with 100 Mbit/sec.
Port 6 is connected to internal switch 2 - now I could test what happens when I connect the UPC Connect box directly to internal switch 1 (port 1 to 5).
This bug on RB2011 should be fixed soon. :-)
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sun Jul 11, 2021 2:12 am
by rextended
Or is a bug on UPC
UPC is not a Samsung TV, why you hijack this topic?
Use a cross-cable
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Fri Aug 06, 2021 4:06 pm
by jaromiru
I had the same issue and after reading this thread, I just disabled 100M connection on the affected eth port (connected to my TV), and left only 10M and 1000M. Works like a miracle now!
Screenshot from 2021-08-06 15-05-01.png
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Sat Dec 11, 2021 11:09 pm
by Waidas
RB2011UAS-2HnD router. Same issue - Samsung TV does not get IP on DHCP. When managed to get IP (can't identify what solved the issue, as many settings tried during the day) - no internet. The previous offer to turn off 110M helped on the 2-5 Gigabit ports of this router. No need to switch 100M off on 6-10 ports thou. Hope this helps, too.
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon Apr 04, 2022 12:46 pm
by abcklocki
Hi All,
I have similar problem with Mikrotik 951G-2HnD and Samsung TV QE75Q80AAT:
- on Mikrotik 951G-2HnD after disabling 100Mbit option - my TV successfully connected at 10Mbit/s
- I tested on 951UI-2HnD (where we have 10/100Mbit) ports - and TV successfully connected at 100Mbit
So conclusion is : something is wrong with Mikrotik firmware for Gigabit routers...
How can I raise support ticket to fix this problem ?
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon Apr 04, 2022 4:38 pm
by chechito
some weeks ago i had an issue connecting a samsung smart tv to rb951G using ethernet cable.
the issue was on tv i think, because connecting the tv to ISP ONU dont work either, after testing with many switches of different vendors some unbranded switch make it work, but with inferior performance than wireless connection.
wired connection on some tv is crap
don't go fast to declare guilty rb951 ethernet negotiation it's a matter of will, both ends needs to be compatible
TV vendors does not put effort on wired connections, they think the important connection is wireless, even on high-end devices wired NIC is not a priority
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Thu May 25, 2023 4:37 pm
by deanMK
I had the same issue and after reading this thread, I just disabled 100M connection on the affected eth port (connected to my TV), and left only 10M and 1000M. Works like a miracle now!
Screenshot from 2021-08-06 15-05-01.png
This worked for me too but little different configured. Before on every power ON the android box didnt get IP or showed connected but without internet connection. On affected LAN port, disable all other things, except 100half and 100mb full duplex, like image bellow:
Edit: Precious configuraiton posted by me seems also to make a problem. Someone found a way to use full 100mbps potwncial from Android Box LAN port?
Re: Mikrotik 951G-2HnD and Samsung TV problem
Posted: Mon May 29, 2023 5:45 pm
by deanMK
Someone to propose other solution except buying 100mbps switch and put it before Android Box ?